Abstract:Abstract Surface roughness is a critical indicator to evaluate the quality of 4H-SiC grinding surfaces. Determining surface roughness experimentally is a time-consuming and laborious process, and developing a reliable model for predicting surface roughness is a key challenge in 4H-SiC grinding. However, the existing models for surface roughness in wafer rotational grinding fail to yield reasonable results because they do not adequately consider the processing parameters and material characteristics. In this study, we proposed a new analytical model for predicting surface roughness in 4H-SiC wafer rotational grinding, which comprehensively incorporates the grinding conditions and material characteristics of brittle substrate. This model derives and calculates the material's elastic recovery coefficient based on contact mechanics and elastic contact theory. Subsequently, we modified the grain depth-of-cut model by incorporating elastic recovery coefficient. Additionally, we analyze the distribution of the failure mode (ductile or brittle) on the surface of a material when the depth at which the material is cut instead follows a random distribution known as the Rayleigh distribution. To validate the accuracy of the established model, a series of grinding experiments are conducted using various grain depth-of-cut to produce 4H-SiC wafers with different surface roughness values. These results are then compared with those predicted by both this model and the traditional model. The findings demonstrate that the calculated data obtained from the proposed model exhibit better agreement with the measured data. This research addresses the need for an improved surface roughness model in 4H-SiC wafer rotational grinding.

Nanomechanical characterization of RB-SiC ceramics based on nanoindentation and modelling of the ground surface roughness

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Some observations in grinding surface quality of FRCMC

Experimental Investigation on the Surface and Subsurface Damages Characteristics and Formation Mechanisms in Ultra-Precision Grinding of SiC

Role of Si in the Surface Damage Mechanism of RB-SiC/Si under Mechanical Loading

Friction Behavior in Nanoscratching of Reaction Bonded Silicon Carbide Ceramic with Berkovich and Sphere Indenters

Fundamental Understanding of the Deformation Mechanism and Corresponding Behavior of RB-SiC Ceramics Subjected to Nano-Scratch in Ambient Temperature

Enhancing the grinding performance of RB-SiC ceramic using abrasive water jet dressed diamond grinding wheels

Modeling Effect of Surface Roughness on Nanoindentation Tests

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Surface/subsurface Observation and Removal Mechanisms of Ground Reaction Bonded Silicon Carbide

Optimizing of Grinding Parameters and Research of Grinding Mechanism of Reaction-bond Silicon Carbon

Mechanism analysis and process optimization of nanogrinding single-crystal SiC

Machining Characteristics And Removal Mechanisms Of Reaction Bonded Silicon Carbide

Mechanical effect of abrasives on silicon surface in chemo-mechanical grinding

Study on the Surface Generation Mechanism During Ultra-Precision Parallel Grinding of SiC Ceramics

A new method for machining RB-SiC with high efficiency and quality: Laser assisted ultrasonic grinding

Surface Roughness Model of Ground 4H-SiC Considering Ductile and Brittle Removal

Cutting mechanism of reaction-bonded silicon carbide in laser-assisted ultra-precision machining

Effect of grinding parameters on surface quality in internal grinding of silicon nitride ceramics

A New Grinding Force Model for Micro Grinding RB-SiC Ceramic with Grinding Wheel Topography As an Input