Abstract:Ultrasound-assisted grinding is a new method for compound precision machining of C/SiC with excellent machining characteristics. The electroplated diamond grinding head performs a two-dimensional ultrasonic auxiliary plane grinding single-factor experiment for SiC, 2.5D-C/SiC, and chopped fiber-C/SiC. The influences of linear speed, feed speed, grinding depth, fiber orientation, and fiber structure on the grinding force and surface quality are analyzed in this study. The surface formation and removal mechanisms of C/SiC composites are discussed. The results show that within the parameters of this experiment, the grinding force and surface roughness decrease with the increase in linear speed and increase with the increase in feed speed and grinding depth. The grinding force and roughness can be significantly reduced by applying two-dimensional ultrasound. The maximum percentage reduction in normal and tangential grinding forces was 26.79% and 31.69% when grinding 2.5D-C/SiC along 90° fiber orientation. The maximum percentage of surface roughness reduction was 37.93% when 2.5D-C/SiC was ground along a 90° fiber orientation. The influence of fiber orientation on the two types of C/SiC grinding force is the same, and both are satisfied that the grinding force is highest in the 45° fiber orientation, second highest in the 90° fiber orientation, and lowest in the 0° fiber orientation. The effect of fiber orientation on the roughness of 2.5D-C/SiC is as follows: the surface roughness is highest at 45° fiber orientation, second highest at 90° fiber orientation, and lowest at 0° fiber orientation. The effect of fiber orientation on the roughness of short-cut fiber-C/SiC is as follows: the surface roughness is highest at 0° fiber orientation, second highest at 45° fiber orientation, and lowest at 90° fiber orientation. The effect of fiber structure on grinding force is as follows: Under the same machining conditions, the grinding forces are highest on SiC, second highest on short-cut fiber-C/SiC, and lowest on 2.5D-C/SiC. The effect of fiber structure on surface roughness is as follows: Under the same machining conditions, the surface roughness is highest on short-cut fiber-C/SiC, second highest on 2.5D-C/SiC, and lowest on SiC.

Some observations in grinding surface quality of FRCMC

A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

Investigations on Grinding Process of Woven Ceramic Matrix Composite Based on Reinforced Fiber Orientations

A Study on Grinding Surface Waviness of Woven Ceramic Matrix Composites

An Experimental Investigation on Ultrasonic Vibration-Assisted Grinding of Sio2f/Sio2 Composites

Experimental investigation on grinding-induced surface damage of Fiber Reinforced Ceramic Matrix Composites

Research of the Grinding Force and Surface Morphology of Fiber-Reinforced Ceramic Matrix Composite

Analysis on Ground Surface Damage of Quartz Fiber-Reinforced Quartz Composites

Influence of diamond wheel grinding process on surface micro-topography and properties of SiO2/SiO2 composite

Effect of Ultrasonic Vibration Assisted Grinding Process on Surface Topography and Properties of C/SiC Composite

Two-dimensional Evaluation of 3D Needled C F /sic Composite Fiber Bundle Surface

Measurement and Evaluation of Fiber Bundle Surface of Long Fiber Reinforced Woven Composites

Studies on the Surface Quality of the Unsteady-State Grinding Technique

New Observations of the Fiber Orientations Effect on Machinability in Grinding of C/SiC Ceramic Matrix Composite

Influence of the fiber orientation on 3D C/C–SiC composite material and its formation mechanism of the machining surface

Optimizing 5-Axis Tool Positioning and Orientation for Machining CFRP Curved Surfaces: Considering Fibers’ Orientation

Effects of Meso-Structure in Grinding of 2.5D Woven Fiber-Reinforced Ceramic Composites

Investigation on machined surface quality in ultrasonic-assisted grinding of Cf/SiC composites based on fracture mechanism of carbon fibers

Experimental study of the removal characteristics of C/SiC with different fiber structure arrangements for two-dimensional ultrasound-assisted grinding

Study on removal mechanism and surface quality of grinding carbon fiber toughened ceramic matrix composite

Assessment of machined surface for SiC f /SiC ceramic matrix composite during ultrasonic vibration-assisted milling-grinding