Abstract:Novel nanocomposites based on an AZ91 magnesium alloy matrix reinforced with a hybrid mixture of SiC and TiC nanoparticles with different nanoparticle contents (0.5% and 1%, by mass fraction) were fabricated by semi-solid stirring followed by ultrasonic vibration. Microstructural analysis indicated that the hybrid nanoparticles were uniformly distributed in the nanocomposite. The morphology of the Mg17Al12-based eutectic phase changed from plate-like, in the as-cast AZ91 alloy, to lamellar in the as-cast nanocomposites. The tensile strength and micro-hardness of the nanocomposites were improved by increasing the fraction of nanoparticles in the composite. Following extrusion, the matrix grains in the nanocomposite were significantly refined. The extent of the grain refinement increased at higher mass fractions of the nanoparticle. This refinement was not only due to dynamic recrystallization, but also the synergistic pinning effects arising from both the externally added nanoparticles as well as dynamically precipitated Mg17Al12 particles. The nanoparticle additions led to increases in yield strength (YS), ultimate tensile strength (UTS) and elongation to failure (EL). The increase in YS was mostly attributed to the effects of grain refinement, with additional contributions from the influence of Orowan strengthening and thermal expansion effects. The values of both the work hardening rate (θ) and strain hardening exponent (n) increased with increasing fraction of nanoparticles. The high θ value in stage III was attributed to both grain refinement and weakening of the basal plane texture, while the high n value was mainly related to the increase in resistance to dislocation movement caused by pinning effects of the nanoparticles.

Hybrid (Carbon Nanotube + Graphene Nanoplatelet)/AZ31 Composite with Simultaneously Enhanced Strength and Ductility

Synergistic Strengthening Effect of Graphene-Carbon Nanotube Hybrid Structure in Aluminum Matrix Composites

Effect of Multi-Walled Carbon Nanotubes and Carbon Fiber Reinforcements on the Mechanical and Tribological Behavior of Hybrid Mg-AZ91D Nanocomposites

Strengthening‐toughening of Graphene Nanoplates and in Situ ZrB2 Nanoparticles Reinforced AA6111 Matrix Composites with Discontinuous Layered Structures

Synergistic effects of hybrid (SiC+TiC) nanoparticles and dynamic precipitates in the design of a high-strength magnesium matrix nanocomposite

Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding

A damage-tolerant hybrid aluminum composite reinforced with carbon nanotube and zirconia: study of strengthening mechanisms by combined experiments and molecular dynamics simulations

Strength-toughness Combination in Nickel Matrix Composites Reinforced by Hybrid Graphene Nanoplatelets-Titanium Diboride

Microstructures and mechanical properties of Al nanocomposites hybrid-reinforced with B4C, carbon nanotubes and graphene nanoplatelets

Effect of Nano-Cu Particles on the Microstructure and Mechanical Properties of Cu/AZ31 Composites

Development and Strengthening Mechanisms of a Hybrid CNTs@SiCp/Mg-6Zn Composite Fabricated by a Novel Method

Synergistic Strengthening and Toughening of Copper Coated Graphene Nanoplates and in Situ Nanoparticles Reinforced AA6111 Composites

Graphene Nanoplatelets Reinforced Mg Matrix Composite with Enhanced Mechanical Properties by Structure Construction

Microstructure and mechanical properties of graphene and nano-zirconia reinforced AlSi10Mg composite fabricated by laser powder bed fusion

Enhancement of thermal–mechanical performances via a selective CNTs configuration in laminated CNTs/AZ31B composite

Synergistic Enhancement of Modulus and Ductility in Mg Matrix Composites: A New Strategy for GNPs&MgOnp and SiCp Hybrid Reinforcement

Enhancing Strength and Toughness of GNS/Al Nanocomposites Via a Hybridization Strategy

Strengthening and Toughening Mechanisms of Mg Matrix Composites Reinforced with Specific Spatial Arrangement of In-Situ TiB2 Nanoparticles

Achieving balanced strength-ductility of heterostructured TiC/graphene nanoplatelets (GNPs) reinforced Al matrix composites by tuning TiC-to-GNPs ratio

Fabrication of Carbon Nanotubes Reinforced AZ91D Composites by Ultrasonic Processing

Comprehensive performance regulation of Cu matrix composites with graphene nanoplatelets in situ encapsulated Al2O3 nanoparticles as reinforcement