Abstract:In the present investigation, efforts have been made to fabricate a magnesium-based AZ31B nanocomposite by integrating nano-sized titanium carbide (TiC) particles via utilising the friction stir processing (FSP) process. The primary objective of the research was to enhance the metallurgical, mechanical, and tribological properties of the base material while investigating the influence of secondary phase particles and various FSP parameters. The findings were rigorously validated through a comprehensive analysis, which encompassed the use of various testing apparatus, such as optical microscopy, field emission scanning microscopy, microhardness testers, tensile and compressive testing machines, along with fractography analysis for wear morphology and tensile properties. The results indicate that the nanocomposite produced under the conditions of a tool rotation speed of 1600 rpm and a transverse speed of 40 mm/min along with three number of FSP passes exhibits superior mechanical and tribological properties compared to both other developed composites and the base alloy. A significant enhancement of nearly 2.68 times in microhardness values along with simultaneous refinement in grain size up to 14.85 times was obtained. Ultimate tensile and compressive strengths report an impressive increase in values up to 2.16 and 1.6 times respectively when compared to the base metal. Furthermore, the tensile fracture behaviour of the base magnesium alloy indicated brittleness, while the AZ31B/TiC composite displayed a combination of ductile and brittle features. In terms of wear morphology, the base magnesium alloy exhibited adhesive and abrasive wear, while the composite demonstrated particle pull-out, delamination, and localised plastic deformation, with enhanced resistance to wear. These findings underscore the significant improvements achieved in mechanical and tribological properties, thus emphasising the novel contributions of this research to the field. Dans l'étude en cours, on a fait des efforts pour fabriquer un nanocomposite AZ31B à base de magnésium en intégrant des particules de carbure de titane (TiC) de taille nanométrique en utilisant le procédé de traitement par friction-malaxage (FSP). L'objectif principal de la recherche était d'accroître les propriétés métallurgiques, mécaniques et tribologiques du matériau de base tout en étudiant l'influence des particules de phase secondaire et de divers paramètres du FSP. On a rigoureusement validé les résultats par une analyse complète, qui englobait l'utilisation de divers appareils d'essais, comme la microscopie optique, la microscopie à balayage à émission de champ, des microduromètres, des machines d'essai de traction et de compression, ainsi qu'une analyse fractographique pour la morphologie de l'usure et les propriétés de traction. Les résultats indiquent que le nanocomposite produit dans les conditions d'une vitesse de rotation de l'outil de 1600 tr/min et d'une vitesse transversale de 40 mm/min avec trois passes de FSP présente des propriétés mécaniques et tribologiques supérieures par rapport aux autres composites développés et à l'alliage de base. On a obtenu une augmentation importante de près de 2.68 fois des valeurs de microdureté ainsi qu'un raffinement simultané jusqu'à 14.85 fois de la taille de grain. Les résistances à la traction et à la compression rapportent une augmentation impressionnante des valeurs jusqu'à 2.16 et 1.6 fois respectivement par rapport au métal de base. De plus, le comportement de rupture en traction de l'alliage de magnésium de base a indiqué de la fragilité, alors que le composite AZ31B/TiC affichait une combinaison de caractéristiques ductiles et fragiles. En termes de morphologie d'usure, l'alliage de magnésium de base affichait une usure par adhésion et par abrasion, alors que le composite présentait une extraction de particules, de la délamination et une déformation plastique localisée, avec une résistance accrue à l'usure. Ces résultats soulignent les améliorations importantes obtenues dans les propriétés mécaniques et tribologiques, mettant ainsi en relief les nouvelles contributions de ces recherches dans le domaine.

Synergistic effect of hybrid reinforcement on magnesium-based composites for enriching mechanical and tribological characteristics

Synergistic effect of different high-performance fibers on the microstructural evolution and mechanical performance of novel hybrid metal matrix composites produced via friction stir processing for automotive applications

Enhanced strength ductility and wear resistance in a friction stir processing engineered AZ31B/TiC magnesium-based nanocomposites

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Enrichment in Fracture Ductility Tribological Characteristics of Magnesium-Based Nanocomposites Fabricated via Multi-pass Friction Stir Processing and Study of Significant Parameters

Effect of Multi-Walled Carbon Nanotubes and Carbon Fiber Reinforcements on the Mechanical and Tribological Behavior of Hybrid Mg-AZ91D Nanocomposites

Synthesis and characterization of magnesium-titanium carbide nanocomposites via friction stir processing: An in-depth parameter investigation

Magnesium‐based nanocomposites developed through multi‐pass friction stir processing and strengthening mechanisms exploration

Metallurgical, mechanical and tribological behavior of Reinforced magnesium-based composite developed Via Friction stir processing

Exploring the mechanical, metallurgical, and fracture characteristics of hybrid-reinforced magnesium metal matrix composite synthesized via friction stir processing route

An Investigation of the Tribological and Mechanical Properties of the Hybrid Mg Nanocomposites Manufactured by Mechanical Alloy

Magnesium Based Hybrid Nanocomposites: An Insight into Nanoparticle Effects on the Microstructure and Mechanical Properties

Investigation on Mechanical and Fracture Behavior of Magnesium Composite Reinforced With Hybrid Fly Ash Particulates Synthesized via Friction Stir Processing Route

Enhancing microstructural and mechanical properties of magnesium AZ31 matrix composites through friction stir processing incorporating silicon carbide, titanium carbide, and graphite particles

Magnesium-based nanocomposites synthesized using friction stir processing: an experimental study

Hybrid Filler Actions on Functional Performance Evaluation of Magnesium Alloy (AZ61) Hybrid Nanocomposites

Influence of Silica rich HNT/MoS2 Hybrid Reinforcements on Mechanical, Wear and Corrosion Characteristics of Magnesium AZ31 alloy

A Study On The Effects Of Hybrid (Sic- Pssa) Nano Sized Reinforcement On Mechanical And Tribological Behaviour Of Al Alloy-Based Metal Matrix Composite Produced By Ultrasonic Assisted Stir Casting

Corrigendum: A study on the effects of hybrid (SIC- PSSA) nano sized reinforcement on mechanical and tribological behaviour of Al alloy-based metal matrix composite produced by ultrasonic assisted stir casting (2024 Mater. Res. Express 11 075010)

Effect of Microstructure on Mechanical Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles

Synthesis and Experimental Investigations of Tribological and Corrosion Performance of AZ61 Magnesium Alloy Hybrid Composites