Abstract:AZ91D, as one of the most widely used casting magnesium alloys, still suffers from inadequate mechanical performances for various applications. Nanoparticles could be used to form high‐performance magnesium matrix nanocomposites. Among all nanoparticles, TiB2 has great potentials to enhance the mechanical property of AZ91D. This paper studies the microstructures and mechanical property of AZ91D‐TiB2 nanocomposites fabricated through solidification nanoprocessing. TiB2 nanoparticles with a diameter of 25 nm are effectively fed into the AZ91D melt through a newly developed automatic nanoparticle‐feeding system. Ultrasonic cavitation is used to disperse these nanoparticles in AZ91D melt for casting. With 2.7 wt% (about 1.0 vol%) of TiB2 nanoparticles addition, the mechanical property of AZ91D is much enhanced (by 21, 16, and 48% for yield strength, tensile strength, and ductility, respectively). Microstructural analysis with optical microscope, SEM, and S/TEM show that α‐Mg grain and a network of massive brittle intermetallic phase (β‐Mg17Al12) are simultaneously refined and modified. Further study suggests that the enhancement of mechanical properties of AZ91D is attributed not only to primary phase grain refinement, but also to the modification of intermetallic β‐Mg17Al12 by TiB2 nanoparticles. A novel solidification nanoprocessing method with liquid state ultrasonic processing and automatic nanoparticle‐feeding system is developed to effectively incorporate and disperse TiB2 nanoparticles into AZ91D melt. The fabricated AZ91D‐TiB2 nanocomposites show much enhanced mechanical properties. The enhancement of mechanical properties is attributed to the simultaneous refinement of primary α‐Mg grains and morphology modification of β‐Mg17Al12 phase networks by TiB2 nanoparticles.

Improving the mechanical properties of AZ31 sheet by adding nano-TC4 particles

Study on Microstructure and Mechanical Properties of TC4/AZ31 Magnesium Matrix Nanocomposites

Microstructures and the improved mechanical properties of AZ91 alloy by incorporating Ti-6Al-4V particles

Effect of Ti particles on microstructure and mechanical properties of Mg–9Al–1Zn based composite sheets

Microstructure, mechanical properties and wear resistance of Ti particles reinforced AZ31 magnesium matrix composites

Influence of Ti-6Al-4V particles on the interfacial microstructure and strength-ductility synergetic mechanism of AZ91 magnesium alloy

The Effect of Ti Particles Addition on the Microstructure and Mechanical Behavior of Mg AZ31/Al 6082 Composite Sheets

Effect of Ti6Al4V reinforcement particles on the mechanical, wear, and corrosion properties of AZ91D magnesium matrix composites

Improvement of strength and ductility of TC4 p /AZ91D magnesium matrix composites by modifying the extrusion ratio

Effect of Nano-Cu Particles on the Microstructure and Mechanical Properties of Cu/AZ31 Composites

Titanium Particulate Reinforced AZ31 Magnesium Matrix Composites with Improved Ductility Prepared Using Friction Stir Processing

Effect of interfacial structure on grain refinement and strength of Ti particles reinforced AZ31 composites

Microstructures and Mechanical Properties of Nanocrystalline AZ31 Magnesium Alloy Powders with Submicron TiB2 Additions Prepared by Mechanical Milling

AZ91D/TiB2 Nanocomposites Fabricated by Solidification Nanoprocessing

Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB2 particles

Effect of Nano-Ti Particles on Microstructure and Mechanical Properties of Mg-3Al-1Zn Matrix Composites

Mechanical Properties Enhancement of AZ91 Magnesium Alloy Reinforced with Various Ratios of Titanium Particles and Processed by ECAP

Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding

Interfacial characteristics and bending properties of a Ti6Al4V-Mg3AlZn laminate metal composite

Influence of TiCN addition on the microstructures and mechanical properties of the AZ31 alloy

Microstructure and mechanical properties of carbon nano-onions reinforced Mg-based metal matrix composite prepared by friction-stir processing