Abstract:Novel nanocomposites based on an AZ91 magnesium alloy matrix reinforced with a hybrid mixture of SiC and TiC nanoparticles with different nanoparticle contents (0.5% and 1%, by mass fraction) were fabricated by semi-solid stirring followed by ultrasonic vibration. Microstructural analysis indicated that the hybrid nanoparticles were uniformly distributed in the nanocomposite. The morphology of the Mg17Al12-based eutectic phase changed from plate-like, in the as-cast AZ91 alloy, to lamellar in the as-cast nanocomposites. The tensile strength and micro-hardness of the nanocomposites were improved by increasing the fraction of nanoparticles in the composite. Following extrusion, the matrix grains in the nanocomposite were significantly refined. The extent of the grain refinement increased at higher mass fractions of the nanoparticle. This refinement was not only due to dynamic recrystallization, but also the synergistic pinning effects arising from both the externally added nanoparticles as well as dynamically precipitated Mg17Al12 particles. The nanoparticle additions led to increases in yield strength (YS), ultimate tensile strength (UTS) and elongation to failure (EL). The increase in YS was mostly attributed to the effects of grain refinement, with additional contributions from the influence of Orowan strengthening and thermal expansion effects. The values of both the work hardening rate (θ) and strain hardening exponent (n) increased with increasing fraction of nanoparticles. The high θ value in stage III was attributed to both grain refinement and weakening of the basal plane texture, while the high n value was mainly related to the increase in resistance to dislocation movement caused by pinning effects of the nanoparticles.

Effect of Nano-Cu Particles on the Microstructure and Mechanical Properties of Cu/AZ31 Composites

Improving the mechanical properties of AZ31 sheet by adding nano-TC4 particles

Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding

Study on Microstructure and Mechanical Properties of TC4/AZ31 Magnesium Matrix Nanocomposites

Development of High Performance Magnesium Matrix Nanocomposites Using Nano-SiC Particulates As Reinforcement

Effect of Micro- and Nano-SiC Particulate Reinforcements in Magnesium-Based Metal Matrix Composites

Effect of interfacial structure on grain refinement and strength of Ti particles reinforced AZ31 composites

Achieving good strength‐plasticity compatibility in Cu composites via carbon nanotube (CNT)‐induced heterogeneous bimodal structure

Microstructure, mechanical properties and wear resistance of Ti particles reinforced AZ31 magnesium matrix composites

Hybrid (Carbon Nanotube + Graphene Nanoplatelet)/AZ31 Composite with Simultaneously Enhanced Strength and Ductility

Microstructure and mechanical properties of carbon nano-onions reinforced Mg-based metal matrix composite prepared by friction-stir processing

Microstructure and mechanical properties of nano-carbon reinforced Mo–Cu–Zr composites

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Microstructural Modification and Strength Enhancement by SiC Nanoparticles in AZ31 Magnesium Alloy During Hot Rolling

Realizing the combination of high strength and good ductility of Cu matrix composites with CrCoNi reinforcement particles and microlaminated structure

Influence of Ti-6Al-4V particles on the interfacial microstructure and strength-ductility synergetic mechanism of AZ91 magnesium alloy

Effect of Nano-Ti Particles on Microstructure and Mechanical Properties of Mg-3Al-1Zn Matrix Composites

Microstructures and the improved mechanical properties of AZ91 alloy by incorporating Ti-6Al-4V particles

Synergistic effects of hybrid (SiC+TiC) nanoparticles and dynamic precipitates in the design of a high-strength magnesium matrix nanocomposite

Microstructure and Mechanical Properties of Cu-CoatedCarbon-Nanotubes-Reinforced Aluminum Matrix Composites Fabricated by Ultrasonic-Assisted Casting

Microstructure and Tensile Properties of Ni Nano Particles Modified MXene Reinforced Copper Matrix Composites