Abstract:In this article, a new class of 3-D interconnection with the magnetically coupled transition is proposed at -band. In contrast to planar approaches, it can connect different components or modules in a complex package with wideband and low-loss performance, even if in separate circuit boards. To overcome the radiation loss, the micromachined rectangular microcoaxial line ( CL) is chosen to be the 3-D signal line, owing to its low-weight robust structure and low-crosstalk transmission. The substrate integrated waveguide (SIW) is chosen to act as the common signal line around the components and modules. The soldering process will introduce the unpredictable parasitic reactance, which can deteriorate the transmission performance. To construct a nonsoldering field transformation structure from the TEM mode to the TE10 mode, the U-shaped magnetic slot is etched on the SIW through the direction orthogonal to the current field vector, and the tail of the CL is directly open. Meanwhile, the transmission characteristics is studied by analyzing the physics-based equivalent-circuit model of this interconnection. The extraction methods of the key parameters, such as turn ratios in the equivalent circuit, are studied for simplifying the synthesis approach. A back-to-back interconnection prototype is designed by the synthesis guideline. The prototypes are fabricated and measured to validate the correctness of this design. The measured results show that the proposed transition achieves a bandwidth from 85 to 100 GHz with the return loss better than 13 dB and the insertion loss around 1.5 dB, which make it promising for high-density interconnection applications at -band.

A Low-Loss Board-to-Cable Connector with Stepwise Structures

A Novel Dieletric Slot Stripline Structure for Millimeter Wave Flexible Printed Circuit

Two 10Gb/s/pin Low-Power Interconnect Methods for 3D ICs

A Novel Transmission Line Structure for High-Speed High-Density Copper Interconnects

Sub-THz Interconnect for Planar Chip-to-Chip Communications

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

Miniaturised dual-band rat-race coupler based on double-sided parallel stripline

Miniaturization of Rat-Race Coupler With Dual-Band Arbitrary Power Divisions Based on Stepped-Impedance Double-Sided Parallel-Strip Line

A High Efficient CTLE for 12.5 Gbps Receiver of JESD204B Standard

A New Structure for Broadband Transition Between Differential Stripline and Differential GCPW

Low-loss Wide-Bandwidth Planar Transmission Line with a Laminated Conductor

Sub-terahertz Dual-polarized Low-loss Transmission System Using COC-Based Dielectric Waveguide

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

A High Coupling Interdigital Coupler Based on Substrate Integrated Coaxial Line

A Novel Structure of Bondwire and Microstrip Lines for Chip-to-Chip Inter-Connection Up to 130Ghz

A 0.90-Tb/s/in 1.29-Pj/b Wireline Transceiver with Single-Ended Crosstalk Cancellation Coding Scheme for High-Density Interconnects.

A Multichannel, High-Bandwidth Wirelane Receiver for D2D Interconnects

Three-Dimensional Interconnection With Magnetically Coupled Transition for W-Band Integration Applications

Solderless Coax-to-Microstrip Connector up to 67 GHz Using Capsule Clearance Transition and Neural Network Optimization

Dual-Band Bandstop Filtering Cable Design Using Defected Conductor Layer With Asymmetric Spiral Structure

A SISL Coupler Using Two Layers of Coupled Line Structure with Dense Interconnecting Vias