Abstract:With excellent mechanical properties, the magnesium matrix composites reinforced by carbon (graphite) fibers (C/Mg) are widely used in industry. Although magnesium and carbon have high chemical compatibility, the C/Mg interface becomes complex after aluminum has been added to. Therefore it is the matrix. It is very important to investigate the microstructure at and near the interface during the manufacture high performance ZM5 magnesium alloys (7.5w%similar to 9.0 w% Al) reinforced with carbon. Graphite fiber were made by vacuum pressure infiltration. After dimpling and ion milling, the specimens were observed under the transmission electron microscope. Although the bonding between the fiber and the matrix was found to be good, a concentration of Al was found at the interface. The microstructure of the interface changes in response to a change of fiber graphitization. The reason is due to the existence of more nucleation sites on the surface of carbon fiber determined by selected area diffraction and EDS. The other phase found at the interface is gamma-Mg17Al12, which precipitated out from the matrix. The gamma phase has an orientation relationship to the matrix. In addition to the gamma phase, dislocations and twins are found at and near the interface. Due to the existence of dislocations, a residual strain layer, about 100 nm similar to 200 nm wide appears. The maximum strain in the layer is about several permillage. On the other hand, under the high resolution microscope the SiC coating is found good to the bonding of the fiber and matrix because of the magnesium oxide in the transition area which is formed during manufacturing.

Interface Structure Between Magnesium Matrix and SiCp

Effect of Mg on Nucleation Process of Recrystallization in Al–Mg–Si/SiCp Composite

Interfacial Characteristic of As-Deformed SiCp-Reinforced Magnesium Matrix Composite

Development of Microstructure in Submicron Particles Reinforced Magnesium Matrix Composite Processed by Room Temperature Deformation

Microstructure and Tensile Properties of Magnesium Matrix Composite: Effected by Volume Fraction of Micron Sicp

Effects of Bimodal Size SiC Particles on the Microstructure Evolution and Fracture Mechanism of AZ91 Matrix at Room Temperature

Fracture Mechanism of Nano- and Submicron-Sicp/mg Composite During Room Temperature Tensile Test: Interaction Between Double Sized Particles and Dislocations

Microstructures, Interface Structure and Room Temperature Tensile Properties of Magnesium Materials Reinforced by High Content Submicron SiCp

Microstructure evolution mechanism of micron particle reinforced magnesium matrix composite at room temperature

Study of the C/ Mg Interface in Magnesium Matrix Composites Reinforced by Carbon (Graphite) Fiber

Effects of (micron+submicron+nano) Multisized SiC Particles on Microstructure and Mechanical Properties of Magnesium Matrix Composites

Effects Of (Micron Plus Submicron Plus Nano) Multisized Sic Particles On Microstructure And Mechanical Properties Of Magnesium Matrix Composites

Interfacial Microstructure and Fracture Behavior of SiC Whisker Reinforced Magnesium Matrix Composites

Study on Behavior of Dynamic Fracture in SiC Nanoparticles Reinforced Magnesium Matrix Composites

Study on Fracture Behavior of Particulate Reinforced Magnesium Matrix Composite Using in Situ SEM

Characteristics and Mechanical Properties of Magnesium Matrix Composites Reinforced with Micron/submicron/nano SiC Particles

Interface microstructure and mechanical property of (Al2O3-SiO2)sf/AZ91D composite

Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process

Microstructure and room temperature tensile properties of 1 μm-SiCp/AZ31B magnesium matrix composite

Interfacial Structure and Mechanical Properties of MgLi Matrix Composites

Interface Microstructure and Mechanical Property of (Al_2o_3-Sio_2)_(sf)/az91d Composite