Abstract:Developing poly(lactic acid) (PLA)-based biodegradable polymer foams with high performance is crucial for sustainable energy conservation and the ecological environment. In this work, by applying poly(lactide-co-caprolactone) (PLCL) as a compatibilizer, the block polymer of poly(l-lactic) acid (PLLA)-b-polycaprolactone (PCL) with a long-chain branched structure was prepared by reactive processing. By utilizing the difference between the glass-transition temperature (T g) and melting temperature (T m) of PLA and PCL, PLLA-b-PCL-PLCL foams with a PCL chain as the foaming phase and an oriented PLLA chain as the enhancing phase were prepared by establishing a solid-phase hot drawing@supercritical CO2 foaming method. The incorporation of PLCL links significantly improved the interfacial compatibility between PLLA and PCL phases and chain entanglements, exhibiting strain-hardening behavior and leading to an improvement in the stretchability of the block polymer. In the hot drawing process in the range of T g(PLA)–T m(PLA), both PLLA and PCL phases were elongated along the drawing direction, and with an increasing draw ratio, the orientation factor and the crystallinity of the two phases increased evidently, accompanied by the formation of a shish–kebab crystalline structure. In the subsequent foaming process in the range of T g(PCL)–T m(PCL), the molecular chains of the PLLA phase were frozen and the retention of the orientation factor reached over 90%, while under CO2, crystallinity and crystallite size increased and a more perfect crystalline structure formed for the PCL phase. With an increasing draw ratio, the saturated dissolved amount of CO2 increased and the cell density and cell size of foam reached 5.13 × 109 cells/cm3 and 4.06 μm, respectively. The fibrillar structures of the PLLA phase appeared on the cell wall, while the tensile strength and modulus of foam reached as high as 65.9 MPa and 1.01 GPa, respectively. As a result, a super-strong PLA-based microcellular foam with dense micropores and highly oriented microfibrillar structures was constructed.

Tuning Cell Structure and Expansion Ratio of Thick-Walled Biodegradable Poly(lactic Acid) Foams Prepared Using Supercritical CO2

Effect of Melt Viscosity on the Cell Morphology and Properties of Poly(lactic Acid) Foams

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Controlled Foaming of Polycarbonate/polymethyl Methacrylate Thin Film with Supercritical Carbon Dioxide

Fabrication of poly(lactic acid) foam with high expansion ratio and oriented cellular structure by restricting cold crystallization

Multi-Response Optimization and Cell Structure-Property Relationships of Polylactide (PLA) Foams

Structure-tunable polyether block amide/polylactic acid foams with shape memory performance using supercritical CO 2 foaming

High-Strength Bio-Degradable Polymer Foams with Stable High Volume-Expansion Ratio Using Chain Extension and Green Supercritical Mixed-Gas Foaming

Extruded polylactide bead foams using anhydrous supercritical CO2 extrusion foaming

A facile strategy for preparation of strong tough poly(lactic acid) foam with a unique microfibrillated bimodal micro/nano cellular structure

Study on Foaming Properties of PLA/NCC Microcellular Foam Materials

Biodegradable and Ultra-High Expansion Ratio PPC-P Foams Achieved by Microcellular Foaming Using CO2 as Blowing Agent

Preparation and Density Control of Pmma Microcellular Foams Via Supercritical Carbon Dioxide Foaming

Effect of Plasticizer on the Morphology and Foaming Properties of Poly(vinyl alcohol) Foams by Supercritical CO2 Foaming Agents

Controlling cellular morphology by supercritical carbon dioxide

Construction of a Highly Oriented Poly(lactic acid)-Based Block Polymer Foam and Its Self-Reinforcing Mechanism

Batch foaming of ultra-high molecular weight polyethylene with supercritical carbon dioxide: Influence of temperature and pressure

Effect of Stereocomplexation on High-temperature Microcellular Foaming Behaviour, Compressive Property and Heat Resistance of Branched Poly(l-lactide)/poly(d-lactide)

Tuning cellular structure in a previously developed microcellular acrylonitrile butadiene styrene/thermoplastic polyurethane blend foams

Supercritical CO2 - assisted production of PLA and PLGA foams for controlled thymol release

Utilization of supercritical CO2 for controlling the crystal phase transition and cell morphology of isotactic polybutene-1 foams