Abstract:Owing to the properties of high-transmittance, wear-resisting and lightweight brittle, glass plays an important role in various electronic equipment screens. The laser induced thermal-crack propagation (LITP) can separate the glass with the advantage of the high-quality, high-efficiency and high-strength. However, the deviation of the separation path (which means the material do not separate in the path of laser scanning) is one of the serious problems in asymmetric linear cutting glass with LITP. In this study, a dual laser beam revision the separation path technology (DLBRP) has been developed for the first time by skillfully arranging two defocused diode pump solid state laser (1064nm). The principle of DLBRP is expounded. This paper studied several factors's effects on the cutting quality such as Master laser power (PM), scanning speed (VM) and laser spot diameter (DM).The smaller the Master laser spot diameter, the smaller deviation of the separation path. The effects of revision factors including Accompanying laser power (PA), Accompanying laser spot diameter on the material surface (DA) and the horizontal relative distance between the Master laser and Accompanying laser (∆X) were investigated. The optimum processing parameters were presented in this paper. The cambered separation path (which means the material gets separated in the arc way) in asymmetry linear cutting glass (which means the cutting path deviating from the symmetry axis of the material in a large scale, and the area of two separated parts is varied widely) could be revised into the straight one. A numerical simulation on the thermal stress and the dynamic propagation of crack in the DLBRP for asymmetric linear cutting glass with LITP was developed to analyze the revision mechanism, which is corresponding to the theoretical analysis and experimental results. The analysis of experimental results and numerical simulation results shows that the DLBRP technology can effectively revise the deviation of the separation path in asymmetry linear cutting glass with LITP. Besides, the clean surface without any pollution and surface damage can be achieved.

Use of inner-heated circular microwave spot to cut glass sheets based on thermal-controlled fracture method

Splitting of Glass and SiC Ceramic Sheets Using Controlled Fracture Technique with Elliptic Microwave Spot

Tailored microwave thermal crack heating model and its application in cutting ceramics

Laser cutting sandwich structure glass–silicon–glass wafer with laser induced thermal–crack propagation

Thermal Controlled Fracture of Al2O3 Substrate by Inducing Microwave Discharge in Graphite Coat

Cutting The Closed Curve Shape Inside Glass With Laser Induced Thermal-Crack Propagation

Mechanism Of Irregular Crack-Propagation In Thermal Controlled Fracture Of Ceramics Induced By Microwave

Splitting Opaque, Brittle Materials with Dual-Sided Thermal Stress Using Thermal-Controlled Fracture Method by Microwave

Microwave thermal stress method cutting Al2O3 ceramics: modeling and experiments

A novel method by microwave cutting ceramics based on thermal crack and trajectory control

Yag Laser Cutting of Multi-Layer Soda-Lime Glasses

Semiconductor laser asymmetry cutting glass with laser induced thermal-crack propagation

Understanding the Processing Quality Problem for Cutting Ceramic Materials Using the Thermal-Controlled Fracture Method Induced by a Single-Surface Heat Source

Combined laser cutting process for interior holes in thick glasses

Effect of Focus Position and Shear Stresses on the Crack Sectional Shape in Semiconductor Laser Linear Cutting Glass

Microwave-Assisted Linear Cutting of Sandstone with a Conical Pick: Experimental Study

Dual Laser Beam Revising the Separation Path Technology of Laser Induced Thermal-Crack Propagation for Asymmetric Linear Cutting Glass

Curve Cutting ZrO<sub>2</sub> Ceramic and Cooling Lower Surface Cutting Silicon Wafer with Laser Induced Thermal-Crack Propagation

High quality full ablation cutting and stealth dicing of silica glass using picosecond laser Bessel beam with burst mode

Innovative laser-assisted glass bending approaches using a near-infrared continuous wave laser

Effect of thermal stresses on chip-free diode laser cutting of glass