Abstract:Bicomponent CoPET‐PPS sea‐island fibers were successfully fabricated with a distinct sea‐island two‐phase structure. The molecular orientation, crystallization, and tensile strength of the as‐prepared fibers significantly improved with increased draw ratios. Controlling viscosity in bicomponent melt spinning is crucial for ensuring spinnability and interfacial stability. However, the significant difference in viscosity between PPS and CoPET poses a challenge to establishing the CoPET‐PPS sea‐island melt spinning system. Herein, the viscosity of PPS is regulated by blending high melt index PPS with spinning grade PPS, resulting in a viscosity ratio of CoPET to PPS over 0.5, thereby demonstrating the good spinnability of the CoPET‐PPS spinning system. The mathematical models for velocity, shear rate, and pressure distribution of CoPET‐PPS melts within the sea‐island spinning assembly are developed using Polyflow software, providing theoretical analysis for sea‐island melt spinning. CoPET‐PPS sea‐island bicomponent fibers are successfully fabricated via the facile bicomponent melt spinning technique, guided by the results of capillary rheology and simulation analysis. In addition, the condensed state structure and mechanical properties of CoPET‐PPS sea‐island fibers are significantly enhanced with increasing draw ratios. This straightforward strategy, combined with experimental and numerical simulations, is anticipated to effectively improve the spinnability of multicomponent melt spinning, especially in cases of significant viscosity differences between polymers. Highlights The CoPET‐PPS spinning system was constructed by regulating PPS viscosity. The distribution of the CoPET‐PPS melt in the spinneret holes was simulated. CoPET‐PPS fibers were fabricated based on rheology and simulation results. The mechanical properties of CoPET‐PPS fibers improve with higher draw ratios.

Study on Spinnability of PP/PU Blends and Preparation of PP/PU Bi-component Melt Blown Nonwovens

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Study on the spinnability and mechanical properties of aspirator aided melt‐spun binary blends polypropylene fibers

Morphology and Mechanical Behavior of Isotactic Polypropylene (ipp)/syndiotactic Polypropylene (spp) Blends and Fibers

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

The study of the chemical crosslinked and foamed PP/LDPE

An effective strategy for the continuous fabrication of melt‐spun sea‐island bicomponent fibers with structural regulation via stretching

Investigation of Crystallization, Morphology, and Mechanical Properties of Polypropylene/Polypropylene-Polyethylene Block Copolymer Blends

Morphology, thermal behavior, rheological, and mechanical properties of polypropylene/polystyrene blends based on elongation flow

Study of the Preparation and Dielectric Property of Pp/Sma/Pvdf Blend Material

PROGRESS IN ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE/POLYPYLENE BLENDS

Preparation of PPR/PS Blends by Multiflow Vibration Injection Molding: Influence of Shish–Kebab Structures and In Situ Fibers

Study on the Processing Technology and Mechanical Properties of Nonwoven Fabric Composited by Recycled PP Selvedges

Effects of Micro-Braiding and Co-Wrapping Techniques on Characteristics of Flax/Polypropylene-Based Hybrid Yarn: A Comparative Study

Dynamic rheological behavior, crystallization and friction performance of ultrahigh molecular weight polyethylene/polypropylene blends by multi-step melt processing strategy

Effect of Polymer Blends on the Properties of Foamed Wood-Polymer Composites

The preparation of polypropylene microfiber yarns via vortex airflow‐assisted melt differential electrospinning

Investigation on the Melt Spinning Fibers of Pp/Organoclay Nanocomposites Prepared by In-Situ Polymerization

Melt spinning of polypropylene

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends