Abstract:Some properties of PP/BF composite foam modified by POE. The quality of foam in polypropylene/basalt fiber (PP/BF) composite materials is currently unsatisfactory, which restricts their use in industrial applications. To address this limitation, the objective of this study is to improve the foaming properties of PP/BF composite foam by modifying their rheological and crystallization behavior using polyethylene–octene (POE) blending modification. The results demonstrate that the inclusion of POE has a beneficial impact on the rheological and crystallization characteristics of PP/BF composites. Consequently, this creates favorable conditions for the foaming process of PP/BF composite foam. It is conducive to obtaining high foaming quality PP/BF composite foam. The results demonstrate that a 5 wt% POE content yields the best foaming performance for the PP/BF composite foam, with the most uniform cell distribution, a cell size of 54 μm and a cell density is measured at 3.43 × 107 cells/cm3. The optimal temperature range for foaming is between 180 and 200°C. The introduction of POE in PP/BF composite foam may lead to a decrease in its tensile and flexural strength. However, this drawback is offset by a significant improvement in the notch impact strength of the foam. This study's findings will enhance our understanding of the production and application of PP/BF composite foam, making it a valuable material for applications that require exceptional toughness. Highlights Improved the crystallization and rheological properties of PP/BF composites. Significantly improve the foaming quality of PP/BF composites. Make PP/BF composite foam has excellent impact toughness.

Effect of Polymer Blends on the Properties of Foamed Wood-Polymer Composites

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Research on the preparation and properties of foamed PP/wood flour composites

Effect of Material Properties on the Foaming Behaviors of PP-Based Wood Polymer Composites Prepared with the Application of Spherical Cavity Mixer

Wood‐thermoplastic Composites from Wood Flour and High‐density Polyethylene

Effects of Filler–filler and Polymer–filler Interactions on Rheological and Mechanical Properties of HDPE–wood Composites

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Preparation and Performance of Poly(lactic Acid)-Wood Flour-Glycidyl Methacrylate-g-Ethylene-Octene Copolymer Composites

Effects Of Coupling Agent And Interfacial Modifiers On Mechanical Properties Of Poly(Lactic Acid) And Wood Flour Biocomposites

Enhancing the foaming properties of polypropylene/basalt fiber composites by altering their rheological and crystallization behavior via polyethylene–octene blending modification

Microcellular Injection Molded Wood Fiber-PP Composites: Part I - Effect of Chemical Foaming Agent Content on Cell Morphology and Physico-mechanical Properties

Preparation and Properties of Wood Flour/HDPE Microcellular Foamed Composites

Characterization and Properties of Thermoplastic Polyether Elastomer/Polyoxymethylene Blends Prepared by Melt-Mixing Method

Study on Mechanical Properties of PP/POE Blends

Rheology and Foaming Behavior of Linear Polypropylene/Low-Density Polyethylene Blends

Microcellular foaming of PP/PE blends with different viscosity and elasticity

Thermal, Mechanical and Morphological Behavior of Poly(propylene)/Wood Flour Composites

Investigation on Rheological Properties, Morphology and Mechanical Properties of HDPE-Wood Flour Composites

High density polyethylene/wood flour composite: Optimization of processing temperature, processing time and coupling agent concentration

Improvement of Cellular Structure and Mechanical Properties for Foam Injection Molding PP/EPDM Blend with Mica

Enhanced Properties Of Biodegradable Poly(Propylene Carbonate)/Polyvinyl Formal Blends By Melting Compounding