Abstract:Polyethylene as a versatile polymer is being increasingly used for parts whose surfaces are in contact with moving metallic components or solid particles. This needs polyethylene to be greatly improved in mechanical properties as well as wear resistance. To this end, in the current work, various contents of ultrahigh-molecular-weight polyethylene (UHMWPE) were added into high-density polyethylene (HDPE) for enhancement of wear resistance, while the oriented crystals, i.e., shish-kebabs, were induced by shear flow for mechanical reinforcement. With 30 wt% UHMWPE was added, highly improved performance balance was achieved. The tensile strength rose from 26.4 MPa for normal HDPE samples to 68.5 MPa for the modified HDPE blends. The same trend was observed for impact toughness, where the impact strength increased from 6.3 to 34.1 kJ m(-2) . Moreover, addition of UHMWPE could reduce the wear rate from 22.1 to 7.6 mg MC-1. A very interesting phenomenon was observed, in which the overall properties of the modified HDPE blends were constantly enhanced with the increase of UHMWPE content though UHMWPE itself does not have much better mechanical properties than the oriented HDPE. This was ascribed to the amplified shear effect as a result of UHMWPE addition. The exceptionally high melt viscosity of UHMWPE assumes a gel state even at high temperature, making it just deform and hardly flow under the shear field, which amplifies the flow velocity difference between UHMWPE phase and HDPE melt. The amplified shear effect resulted in more pronounced molecular orientation and thus formation of a higher content of shish-kebab microstructure. Our work indicated that the melt processing-structure control strategy can desirably manipulate polyethylene products with desired properties.

PROGRESS IN ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE/POLYPYLENE BLENDS

Dynamic rheological behavior, crystallization and friction performance of ultrahigh molecular weight polyethylene/polypropylene blends by multi-step melt processing strategy

Ultra-high molecular weight polyethylene (UHMWPE)/high-density polyethylene (HDPE) blends with outstanding mechanical properties, wear resistance, and processability

Morphology evolution and mechanical property enhancement of linear low‐density polyethylene by adding disentangled ultrahigh molecular weight polyethylene

Elongational Flow Field Processed Ultrahigh Molecular Weight Polyethylene/Polypropylene Blends with Distinct Interlayer Phase for Enhanced Tribological Properties

Rheological, Thermal, and Morphological Properties of Low-Density Polyethylene/Ultra-High-Molecular-Weight Polyethylene and Linear Low-Density Polyethylene/Ultra-High-Molecular-Weight Polyethylene Blends

Properties of blends of ultra-high molecular weight polypropylene with various low molecular weight polypropylenes

Rheological and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene/high Density Polyethylene/polyethylene Glycol Blends

Preparation of HDPE/UHMWPE/MMWPE Blends by Two-Step Processing Way and Properties of Blown Films

Study on Mechanical Properties of PP/UHMWPE Blends

Dynamic Rheological Behavior of Hdpe/Uhmwpe Blends

Effects of Maleic Anhydride Grafted Polyethylene on Rheological, Thermal, and Mechanical Properties of Ultra High Molecular Weight Polyethylene/Poly(Ethylene Glycol) Blends

Rheological Properties and Morphological Evolutions of Polypropylene/Ethylene-Butene Copolymer Blends

Short-time fabrication of well-mixed high-density polyethylene/ultrahigh-molecular-weight polyethylene blends under elongational flow: morphology, mechanical properties and mechanism: Fabrication and performance of HDPE/UHMWPE blends under elongational flow

Tailored Bonded Interfacial Intermolecular Entanglement of Polyethylene/Ultrahigh-Molecular-Weight Polyethylene Blends: Enhancing Miscibility, Reinforcement, and Friction Reduction

Exploring the Entangled State and Molecular Weight Ofuhmwpeon the Microstructure and Mechanical Properties Ofhdpe/uhmwpeblends

Improved Performance Balance of Polyethylene by Simultaneously Forming Oriented Crystals and Blending Ultrahigh-Molecular-Weight Polyethylene

Preparation and Characterization of Electrospun Mat of Ultra-high Molecular Weight Polyethylene/High-Density Polyethylene Blends

Rheological Behavior of Ultrahigh Molecular Weight Polyethylene/low‐density Polyethylene Blending Gels with High Solid Content

Investigation of Crystallization, Morphology, and Mechanical Properties of Polypropylene/Polypropylene-Polyethylene Block Copolymer Blends

A Comprehensive Review of Ultrahigh Molecular Weight Polyethylene Fibers for Applications Based on Their Different Preparation Techniques