Abstract:2.5-D braided high-alumina fabric-reinforced silica matrix composite materials are being developed as functional structural composites with thermal load-bearing capacity for the top thin face sheet of an integrated thermal protection system (TPS). This study seeks to elucidate the mechanical behavior of a 2.5-D braided top face sheet composite material subjected to off-axis compression, while the sandwich TPS is under deflection caused by the bending moment resulting from the temperature gradient in the thickness direction and the aerodynamic pressure on the top face sheet panel. The effective compressive modulus and ultimate strength along the warp direction are significantly lower than those along the weft direction. Both decrease as the off-axis loading angle increases, indicating anisotropy. A nonlinear compressive stress–strain response with extensive damage along the warp yarn direction, while the weft yarn direction exhibits a quasi-linear response with minor damage before fracture. Within the framework of continuum damage mechanics, fiber kinking and transverse inter-fiber cracking of fiber bundles with the linear damage evolution law are all considered simultaneously for the progressive damage model. To account for the interaction between multiple damage mechanisms in the fiber yarn, a joint degradation induced by multiple damage mechanisms is first proposed. The analysis reveals that the anisotropy of failure under compression is primarily due to the warp fiber bundle's much larger undulation than the weft fiber bundle, which causes severe bending-dominated damage. Using the calibrated model, the qualitative effects of material thickness and yarn geometry size on the compressive mechanical properties of materials are analyzed.

Experimental And Numerical Investigation On Three-Point Bending Behaviors Of Unidirectional Warp-Knitted Composites

Numerical investigation of tensile behavior of three-dimensional six-directional braided composites

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Research on the Influence of Yarn Reduction on the Bending Performance of Three-dimensional Woven Composites

Investigation on the off-axis tensile failure behaviors of 3D woven composites through a coupled numerical-experimental approach

Multiaxial failure mechanism of 3D triple-twill warp-lining woven composites

Experimental and numerical study of specific bending behavior of tufted multilayered reinforcements and effects of tufting density

Investigation of parameterized braiding parameters and loading directions on compressive behavior and failure mechanism of 3D four-directional braided composites

Failure Analysis of 3D Woven Composites under Tension Based on Realistic Model

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

A Combined Experimental and Numerical Approach to Investigate the Failure Behaviors of 3D Woven Composites under Biaxial Tensile Loading

Bimodulus constitutive models and the simulation on bending properties of woven carbon fibre-reinforced composites

Nonlinear Bending Analysis of a 3D Braided Composite Cylindrical Panel Subjected to Transverse Loads in Thermal Environments

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

Parameterized meso-scale modeling and experimental study on the tensile damage evolution and strength of 3D five-directional braided composites

Experimental and Numerical Study on the Bending Behavior of Satin-Woven SiCf/SiC Composites

Investigation on the Compressive Damage Mechanisms of 3D Woven Composites Considering Stochastic Fiber Initial Misalignment

Effect of triaxial woven fabric on bending properties of unidirectional composites

Anisotropic failure analysis of 2.5-D braided composites under compression