Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Bimodulus constitutive models and the simulation on bending properties of woven carbon fibre-reinforced composites

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Bimodulus constitutive relation and mesoscopic model of braided composites

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Experiment and simulation study on bonded, bolted and hybrid bolted/bonded joints of textile CFRP using bimodulus constitutive model

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

A Dynamic Constitutive Model and Simulation of Braided CFRP under High-Speed Tensile Loading

Modelling of Bridging Toughening in Fiber-Reinforced Composites

GWFMM Model for Bi-Modulus Orthotropic Materials: Application to Mechanical Analysis of 4D-C/C Composites

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Transverse Bending and Axial Compressing Mechanical Characteristics of Carbon Fiber Reinforced Plastic Sandwich Laminated Square Tubes

The effects of unequal compressive/tensile moduli of composites

3D FEA Modelling of Laminated Composites in Bending and Their Failure Mechanisms

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure