Abstract:With the growing need for large area display technology and the push for a faster and cheaper alternative to the current amorphous indium gallium zinc oxide (a-IGZO) as the active channel layer for pixel-driven thin film transistors (TFTs) display applications, gallium tin zinc oxide (GSZO) has shown to be a promising candidate due to the similar electronic configuration of Sn4+ and In3+. In this work TFTs of GSZO sputtered films with only a few atomic % of Ga and Sn have been fabricated. A systematic and detailed comparison has been made of the properties of the GSZO films annealed at two temperatures: 140 °C and 450 °C. The electrical and optical stabilities of the respective devices have been studied to gain more insight into the degradation mechanism and are correlated with the initial TFT performance prior to the application of stress. Post deposition annealing at 450 °C of the films in air was found to lead to a higher atomic concentration of Sn4+ in these films and a superior quality of the film, as attested by the higher film density and less surface and interface roughness in comparison to the lower annealed temperature device. These result in significantly reduced shallow and deep interface traps with improved performance of the device exhibiting VON of −3.5 V, ION/IOFF of 108, field-effect mobility (μFE) of 4.46 cm2 V−1s−1, and sub-threshold swing of 0.38 V dec−1. The device is stable under both electrical and optical bias for wavelengths of 550 nm and above. Thus, this work demonstrates GSZO-based TFTs as a promising viable option to the IGZO TFTs by further tailoring the film composition and relevant processing temperatures.

Annealing effects on the performances of Bismuth-doped Indium Zinc Oxide thin-film transistors

Influence of Annealing Temperatures on Solution-Processed Alinzno Thin Film Transistors

Annealing Effect on Amorphous Indium-Zinc-Tungsten-Oxide Thin-Film Transistors

The Influence of Annealing Temperature on Amorphous Indium‐Zinc‐Tungsten Oxide Thin‐Film Transistors

Influence Of Thermal Annealing On The Electrical Characteristics Of Doped Zinc Oxide Thin Film Transistors

Effects of Annealing Process on Characteristics of Fully Transparent Zinc Tin Oxide Thin-Film Transistor

Investigation of Bismuth Doped Indium-Zinc-Oxide Thin Film Transistors

Annealing effects of In2O3 thin films on electrical properties and application in thin film transistors

P‐5.4: Processing Effects on the Performances of Indium Zinc Bismuth Oxide Thin Film Transistors

Effects of low-temperature (120 °C) annealing on the carrier concentration and trap density in amorphous indium gallium zinc oxide thin film transistors

Effects of thermal annealing on the electrical characteristics of In-Ga-Zn-O thin-film transistors with Al2O3 gate dielectric

Annealing Treatment on Amorphous InAlZnO Films for Thin-Film Transistors

Effects of low‐temperature thermal annealing on interface characteristics in IZO/IGZO dual‐channel thin‐film transistors

The Effects of Post Annealing Process on the Electrical Performance and Stability of Al-Zn-O Thin-Film Transistors

Dependence of Annealing on Stability of Transparent Amorphous InGaZnO Thin Film Transistor

Effect of Annealing Temperature on the Electrical Properties of ZnO Thin-Film Transistors

Effect of annealing on characteristics of amorphous InGaZnO thin film transistors fabricated by sol-gel technical

Effect of Annealing Temperature on Electrical Properties of ZTO Thin-Film Transistors

Impact of pre-annealing process on electrical properties and stability of indium zinc oxide thin-film transistors

The effect of annealing temperature on the stability of gallium tin zinc oxide thin film transistors

Stability of Amorphous Inalzno Thin-Film Transistors