Abstract:Abstract Steam turbines are applied in production plants characterized by very large injections of steam. For this reason, the design and optimization of the admission are fundamentals to obtain an adequate level of turbine efficiency and ensure uniform flow at the inlet of the low pressure stages downstream the injection. In conjunction with a flexible operation and partial load conditions, it is important to estimate the losses appearing at those admissions sufficiently. The aerodynamic performance and flow field of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes were experimentally measured and numerically simulated in this paper. The total pressure loss, outlet flow angle and mass flow rate of the individual tangential admission volute at three different outlet Mach numbers and tangential admission volute coupled with the downstream vanes at four different inlet total pressures were measured. The flow field of the experimental tangential admission volute for the steam turbine was numerically investigated using threedimensional Reynolds-Averaged Navier-Stokes (RANS) and SST turbulence model. The numerical aerodynamic parameters of the tangential admission volute were in good agreement with the experimental data. The accuracy of the presented numerical method was validated. The flow field and aerodynamic parameters of tangential admission volute coupled with the downstream vanes were discussed under different inlet total pressure flow conditions. Then, three volute cases with different transverse distance were designed to investigate the influence of different outlet airflow angles on the aerodynamic performance of the downstream vanes. Results show that the outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes usually keep constants when the inlet total pressure is increases. The averaged outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes equal 152.0° and 166.6°, respectively. Comparing with the individual tangential admission volute, the outlet airflow angle of the tangential admission volute coupled with the downstream vanes is more uniform. The total pressure loss and mass flow rate of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes increase with the inlet total pressure. With the increase of the inlet total pressure, the total pressure loss coefficient of the individual tangential admission volute increases from 0.73% to 1.64%. In the same case, the total pressure loss of the tangential admission volute coupled with the downstream stator vane increases from 0.82% to 2.66%. The average airflow angle of the volute increases with the increase of the transverse distance. With the increase of the transverse distance, the total pressure loss coefficient of the volute increases and the total pressure loss coefficient of the vanes decreases. At the same time, the total pressure loss coefficient of the whole model decreases at first and then increases. The present work provides the reference for the design and performance analysis of the tangential admission volute for the steam turbines.

Effect of nozzle box arrangement on the aerodynamic performance of a single stage partial admission turbine

Numerical Investigation of Partial Admission Losses in Radial Inflow Turbines

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Study on influence of admissions on loss generation in a twin-entry nozzleless radial turbine

Unsteady flow and load in 50% partial admission control stage with different admitting arc distributions

Aerodynamic Performance Analysis of Partial Admission Dual Row Control Stage at Different Working Conditions

Loss Analysis of a Mix-Flow Turbine with Nozzled Twin-Entry Volute at Different Admissions

Numerical Study on Unsteady Flow of a Supersonic Partial Admission Impulse Turbine

Effects of Axial Gap and Nozzle Distribution on Aerodynamic Forces of a Supersonic Partial-Admission Turbine

Full 3-D Unsteady Numerical Simulation of Control Stage in Partial Admission Turbine

Unsteady Numerical Investigation of the Influence of Axial Gap on the Turbine Loss

Suppression Mechanism of a Novel Chamber Structure on the Unsteady Aerodynamic Force

A Study on the Flow Physics of a Supersonic Partial Admission Impulse Turbine for Different Tip Clearances

Unsteady Aerodynamics and Forces Characteristics of Dual Row Control Stage with Partial Admission Condition

Numerical Investigations on Aerodynamic Performance of Nozzle Control Stage of a 600MW Steam Turbine under Different Backing Pressure Conditions

Experimental And Numerical Investigations On The Aerodynamic Performance Of The Three-Stage Turbine With Consideration Of The Leakage Flow Effect

Experimental Study on the Aerodynamic Performance of Variable Geometry Low-Pressure Turbine Adjustable Guide Vanes

Numerical Investigation of the Interaction Between Mainstream and Tip Shroud Leakage Flow in a 2-Stage Low Pressure Turbine

Computational Fluid Dynamics Modeling Three-Dimensional Unsteady Turbulent Flow and Excitation Force in Partial Admission Air Turbine

Experimental Measurements and Numerical Investigations on the Aerodynamic Performance and Internal Flow Fields of Tangential Admission Volutes for Steam Turbines

Effect of Variable Stator Vanes with Penny Cavities on the Performance and Secondary Flow of a Single-Stage Axial Compressor