Experimental and simulation study of energy loss mechanism of low pressure ratio radial turbine
Wenping Xie,Mingyang Yang,Kun Zhang,Kangyao Deng
DOI: https://doi.org/10.1177/09544070241272858
2024-09-23
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. Low-pressure ratio conditions are commonly encountered in radial turbines. When operating at low pressure ratio condition, a significant portion of the turbine energy loss occurs as residual velocity loss in the form of swirling flow at the outlet pipe. Typically, this energy can be recovered by the next stage turbine or reduced by the diffuser. However, there is a lack of experimental and simulation studies on the swirling flow at the outlet of turbines. The mechanism governing the changing pattern of swirling flow remains unclear, limiting the effective utilization and reduction of residual velocity loss. This study conducts theoretical and experimental research on turbine outlet swirling flow. Firstly, this paper introduces a novel two-dimensional hot-wire anemometry stepping mechanism for measuring swirling flow at a turbine outlet cross-section. Experimental results demonstrate that the proposed measurement method effectively captures the morphological changes of turbine outlet swirling flow. The results indicate a strong coupling relationship between axial and circumferential velocity. Subsequently, to elucidate the reasons for the coupling of velocity in two directions and the development of swirling flow in the outlet pipeline, simulations of turbine performance under different velocity ratio conditions were conducted. Results show that under a wide range of velocity ratios, not only does the direction of the turbine outlet swirling flow change, but it also leads to the swirl number exceeding the critical swirl ratio under high velocity ratio conditions, resulting in the formation of a central recirculation zone (CRZ) at the pipe outlet. The main cause of the strong coupling effect between velocities in two directions is attributed to the increased swirl intensity leading to enhanced adverse pressure gradients at the core of the vortex. Lastly, a model describing the variation of VGT turbine outlet swirling flow is established, indicating a linear relationship between the swirl number and the velocity ratio, with a steeper change as the pressure ratio decreases.
engineering, mechanical,transportation science & technology