Abstract:Abstract Steam turbines are applied in production plants characterized by very large injections of steam. For this reason, the design and optimization of the admission are fundamentals to obtain an adequate level of turbine efficiency and ensure uniform flow at the inlet of the low pressure stages downstream the injection. In conjunction with a flexible operation and partial load conditions, it is important to estimate the losses appearing at those admissions sufficiently. The aerodynamic performance and flow field of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes were experimentally measured and numerically simulated in this paper. The total pressure loss, outlet flow angle and mass flow rate of the individual tangential admission volute at three different outlet Mach numbers and tangential admission volute coupled with the downstream vanes at four different inlet total pressures were measured. The flow field of the experimental tangential admission volute for the steam turbine was numerically investigated using threedimensional Reynolds-Averaged Navier-Stokes (RANS) and SST turbulence model. The numerical aerodynamic parameters of the tangential admission volute were in good agreement with the experimental data. The accuracy of the presented numerical method was validated. The flow field and aerodynamic parameters of tangential admission volute coupled with the downstream vanes were discussed under different inlet total pressure flow conditions. Then, three volute cases with different transverse distance were designed to investigate the influence of different outlet airflow angles on the aerodynamic performance of the downstream vanes. Results show that the outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes usually keep constants when the inlet total pressure is increases. The averaged outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes equal 152.0° and 166.6°, respectively. Comparing with the individual tangential admission volute, the outlet airflow angle of the tangential admission volute coupled with the downstream vanes is more uniform. The total pressure loss and mass flow rate of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes increase with the inlet total pressure. With the increase of the inlet total pressure, the total pressure loss coefficient of the individual tangential admission volute increases from 0.73% to 1.64%. In the same case, the total pressure loss of the tangential admission volute coupled with the downstream stator vane increases from 0.82% to 2.66%. The average airflow angle of the volute increases with the increase of the transverse distance. With the increase of the transverse distance, the total pressure loss coefficient of the volute increases and the total pressure loss coefficient of the vanes decreases. At the same time, the total pressure loss coefficient of the whole model decreases at first and then increases. The present work provides the reference for the design and performance analysis of the tangential admission volute for the steam turbines.

Effect of Inlet Total Pressure Non-Uniform Distribution on Aerodynamic Performance and Flow Field of Turbine

Effects of Inlet Total Pressure Non-Uniformities on Aero-Thermal Performance of Gas Turbine Endwalls

Effects of inlet turbulence intensity on wall heat transfer in a turbine guide vane

A Study of the Mechanism of the Influence of Inlet Total Pressure Distortion on Compressor Performance and Its Flow Field

Numerical Analysis on Effects of Inlet Pressure and Temperature Non-Uniformities on Aero-Thermal Performance of a HP Turbine

Study on the Influence of Total Pressure Distortion on End Wall Flow Field in a Supersonic Compressor

Effect of Inlet Distortion on the Performance of Axial Transonic Contra-Rotating Compressor

Study on effects of inlet nonuniformities on aerothermal performance of NGV pressure side with different film cooling designs

Numerical Investigation on Propagation Characteristics of Inlet Total-Pressure Distortion in a Centrifugal Compressor

A Study of Influences of Inlet Total Pressure Distortions on Clearance Flow in an Axial Compressor

Effects of Non-Uniform Inflow on the Spatial and Temporal Distribution of Impeller Excitation in Axial Flow Pumps in Water Tunnels

Numerical research on the aerodynamic performance of inlet volute duct for a heavy-duty gas turbine

Numerical Study on the Influence of Inlet Turbulence Intensity on Turbine Cascades

Experimental Measurements and Numerical Investigations on the Aerodynamic Performance and Internal Flow Fields of Tangential Admission Volutes for Steam Turbines

Effects of Total Pressure Distortion on Rotor End Wall Flow Structure of a Supersonic Compressor

Study for the Effect of Combined Pressure and Temperature Distortion on a Turbojet Engine

Numerical Study on the Propagation Characteristics of Circumferential Temperature Distortion in a Combined Compressor

Numerical Analysis of Several Key Factors Influencing the Flow Field and Performance of a HP (High Pressure) Turbine

An Investigation of Aerodynamic Performance of Aeroengine Fan and Booster under Non-Uniform Inlet Conditions

Numerical Investigation on the Effect of Tip Clearance on a Turbine Stage Flow-field and Aerodynamic Performance

Numerical study on the influence of inlet distortion on integrated nacelle fans based on coupling crosswind and angle of attack