Numerical Analysis of High-Altitude Inlet Air on Boundary Layer Flow Loss in an Aero-Engine Compressor

Feng Wu,Limin Gao,Lu Yang,Aqiang Lin,Hai Zhang
DOI: https://doi.org/10.3390/en13164155
IF: 3.2
2020-08-11
Energies
Abstract:A numerical analysis is performed to explore the high altitude and high Mach flight on the effect of wall boundary layer loss in the compressor. The accuracy for solution results by the application of the similarity criterion and parameter definition of the air inlet is compared with the existing experimental test result. The results indicate that the radial adverse pressure gradient in the rotor domain gradually increases along the span direction and decreases as flight Mach number increases; meanwhile, the circumferential adverse pressure gradient on the pressure side of the rotor blade is correspondingly larger and less than that on the suction side. In particular, the entropy increase along the streamwise shows a decreasing trend and an increasing trend inside the hub and shroud wall boundary layers, respectively. At 2.1 Ma, the entropy increase in the rotor domains enhances by 24.36–27.80% inside the shroud boundary layer, relative to the hub boundary layer; however, it decreases by 0.97–8.54% in the stator domain. With the increase in flight Mach number from 2.1 to 3.4, the average entropy increase reductions in the rotor domain decrease by 18.99–24.97% within the hub boundary layer and 5.71–8.1% within the shroud boundary layer. In the stator domain, it drops by 18.45–9.03% inside the hub boundary layer and 6.88–8.67% inside the shroud boundary layer. It was therefore found that, as Mach number increases from 2.1 to 3.4, the entropy increase reduction is larger inside the hub boundary layer than inside the shroud boundary layer.
energy & fuels
What problem does this paper attempt to address?
The paper attempts to address the issue of the impact of boundary layer flow losses on the compressor wall of an aircraft engine under high-altitude and high-Mach number flight conditions. Specifically, the authors explore the effect of high-Mach number flight on compressor wall boundary layer losses through numerical analysis methods and simulate compressor performance under different flight conditions by defining inlet parameters and applying similarity criteria. The main objective of the study is to systematically evaluate the impact of high-Mach number flight on compressor wall boundary layer losses, thereby providing a theoretical basis for improving compressor performance. ### Background and Motivation 1. **Importance of Compressors**: Compressors are one of the key components of aircraft engines, and their performance directly affects the efficiency and stability of the entire engine. 2. **Flow Loss Issues**: Under high adverse pressure gradient conditions, flow losses within the compressor (such as leakage flow and secondary flow) significantly impact engine performance. 3. **Insufficiency of Existing Research**: Although many studies have focused on flow losses within compressors, most of them are primarily qualitative analyses, lacking quantitative analysis of compressor wall boundary layer losses under high-Mach number conditions. ### Research Objectives 1. **Systematic Evaluation**: Systematically evaluate the impact of high-Mach number flight on compressor wall boundary layer losses. 2. **Numerical Simulation**: Use numerical simulation methods to define inlet parameters and apply similarity criteria to simulate compressor performance under different flight conditions. 3. **Quantitative Analysis**: Use entropy increase as an indicator to describe flow losses and quantitatively analyze the boundary layer losses on the compressor wall under different Mach numbers. ### Methods and Models 1. **Numerical Methods**: Use commercial software ANSYS-Fluent for 3D compressible, pressure-based solver simulations. 2. **Model Establishment**: Establish inlet and compressor models through similarity and modeling theory to ensure the similarity of the two flow fields. 3. **Mesh Division**: Refine the mesh near the boundary layer to capture near-wall effects and meet the required Y-plus values. 4. **Boundary Conditions**: Define the boundary conditions for the inlet and outlet, including total temperature, total pressure, and static pressure. ### Main Findings 1. **Pressure Gradient Changes**: As the flight Mach number increases, the radial adverse pressure gradient in the rotor region gradually increases, while the circumferential adverse pressure gradient changes differently on the blade pressure and suction surfaces. 2. **Entropy Increase**: The entropy increase within the wall boundary layer varies significantly under different Mach numbers. For example, at Mach 2.1, the entropy increase within the shroud boundary layer is 24.36% to 27.80% higher than that within the hub boundary layer; at Mach 3.4, the average entropy increase within the hub boundary layer decreases more. 3. **Flow Loss Trends**: With the increase in flight Mach number, the flow losses within the compressor wall boundary layer generally show a decreasing trend, especially more evident within the hub boundary layer. ### Conclusion Through numerical simulation methods, this study systematically evaluates the impact of high-Mach number flight on compressor wall boundary layer losses, providing an important theoretical basis for improving compressor performance. The results show that under high-Mach number flight conditions, the flow losses within the compressor wall boundary layer exhibit significant regular changes. These findings are of great significance for the design and optimization of high-performance aircraft engines.