Abstract:Aiming at the existing voltage sag localization methods with complex models, large calculation volume, low localization efficiency, and large error due to the influence of measurement error and fault type, and other shortcomings, this paper proposes a method for locating voltage sag sources based on power polarity and twin characteristics matching. The correctness and superiority of the proposed method is verified based on IEEE33 node modelling. Precisely locating the voltage sag sources is significant for improving power quality and clarifying the responsibilities of both power supply and consumption. However, the existing location models are complex, computationally intensive, and influenced by the measurement error and fault type, which have low positioning efficiency and large errors. Therefore, this paper proposes a method for locating voltage sag sources based on power polarity and twin characteristics matching. The method firstly uses the polarity of the sequence sag component disturbance reactive power at the monitoring point to determine the sag line. Secondly, the basic realization method of the twin power system is discussed, and the twin characteristics are defined by combining the positive and negative sequence sag component disturbance reactive power and the twin database is established. Thirdly, the spectral norm and Pearson product‐moment correlation coefficient are used to define the data matching degree, and the precise location model of the sag source is established with the objective function of maximizing the data matching between the twin characteristics of the preset and actual sag. Finally, the Improved Whale Optimization Algorithm is used to solve the location model. The correctness and superiority of the proposed method is verified based on IEEE33 node modelling.

New Method for Fault Positioning Based on Nodal Impedance Matrix and Voltage Sag

Novel Fault Locating Method Based on Synchronized Voltage Phasor

Accurate Fault Location of Complex Distribution Network with Distributed Generators

New Fault Location Method for HV T-connection. Transmission Lines

Voltage sag source location based on power polarity and twin characteristics matching

A Two-Terminal Fault Location Algorithm Using Asynchronous Phasors Based on Distributed Parameter Model

A Novel Fault Location Method Suitable for Transmission Line with Multi Branches

Voltage sag source location based on sag event amplitude information

Fault Location Method in Power Network by Applying Accurate Information of Arrival Time Differences of Modal Traveling Waves

A Fault Path Searching Algorithm Based on Voltage Sag State Estimation for Complicated Distribution Systems

Fault location based on variable mode decomposition and kurtosis calibration in distribution networks

Fault Detection and Location of 35 kV Single-Ended Radial Distribution Network Based on Traveling Wave Detection Method

Current Sag and Mismatch Based Earth Fault Location for Distribution Network with Renewable Energy Resources

Fault Location Method for Distribution Network Using an Additional Inductance Strategy

Fault Location Based on Synchronous Data of Both Ends in Non-effectively Grounded System

An Identification Method for Asymmetric Faults With Line Breaks Based on Low-Voltage Side Data in Distribution Networks

Assessment of voltage sag/swell in the distribution network based on energy index and influence degree function

Research on broken line fault location method based on innovation graph

Active Fault-Locating Scheme for Hybrid Distribution Line Based on Mutation of Aerial-Mode Injected Pulse

New Algorithm for 2-terminal Transmission Line Fault Location Integrating Voltage Phasor Feature and Phase Angle Jump Checking

Fault Location Method for Distribution Network Based on Synchronous Measurement