Abstract:The mid-infrared (MIR, 2–20 μm) waveband is of great interest for integrated photonics in many applications such as on-chip spectroscopic chemical sensing, and optical communication. Thermo-optic switches are essential to large-scale integrated photonic circuits at MIR wavebands. However, current technologies require a thick cladding layer, high driving voltages or may introduce high losses in MIR wavelengths, limiting the performance. This paper has demonstrated thermo-optic (TO) switches operating at 2 μm by integrating graphene onto silicon-on-insulator (SOI) structures. The remarkable thermal and optical properties of graphene make it an excellent heater material platform. The lower loss of graphene at MIR wavelength can reduce the required cladding thickness for the thermo-optics phase shifter from micrometers to tens of nanometers, resulting in a lower driving voltage and power consumption. The modulation efficiency of the microring resonator (MRR) switch was 0.11 nm/mW. The power consumption for 8-dB extinction ratio was 5.18 mW (0.8 V modulation voltage), and the rise/fall time was 3.72/3.96 μs. Furthermore, we demonstrated a 2 × 2 Mach-Zehnder interferometer (MZI) TO switch with a high extinction ratio of more than 27 dB and a switching rise/fall time of 4.92/4.97 μs. A comprehensive analysis of the device performance affected by the device structure and the graphene Fermi level was also performed. The theoretical figure of merit (2.644 mW−1μs−1) of graphene heaters is three orders of magnitude higher than that of metal heaters. Such results indicate graphene is an exceptional nanomaterial for future MIR optical interconnects.

Graphene-embedded First-Order Mode Polymer Mach-Zender Interferometer Thermo-Optic Switch with Low Power Consumption.

Low Power Consumption Mode Switch Based on Three-Dimensional Polymer Mach-Zehnder Interferometer

Dispersed-Monolayer Graphene-Doped Polymer/Silica Hybrid Mach-Zehnder interferometer (MZI) Thermal Optical Switch with Low-Power Consumption and Fast Response.

Low-power-consumption Polymer Mach Zehnder Interferometer Thermo-Optic Switch at 532 Nm Based on a Triangular Waveguide

Graphene-Assisted Polymer Waveguide Optically Controlled Switch Using First-Order Mode

Low Power Consumption 3D-Inverted Ridge Thermal Optical Switch of Graphene-Coated Polymer/Silica Hybrid Waveguide

Low-power all-optical switch based on a graphene-buried polymer waveguide Mach-Zehnder interferometer

A Low-Power Consumption MZI Thermal Optical Switch with a Graphene-Assisted Heating Layer and Air Trench

Low-Power Broadband Thermo-Optic Switch with Weak Polarization Dependence Using a Segmented Graphene Heater

High-performance Graphene-Integrated Thermo-Optic Switch: Design and Experimental Validation [Invited]

Thermo-Optic Mode Switch Based on an Asymmetric Mach–Zehnder Interferometer

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

Silicon Thermo-Optic Switches with Graphene Heaters Operating at Mid-Infrared Waveband

Low Power Consumption Thermo‐optic Switch Based on DR1/PMMA

850-Nm Polymeric Waveguide Thermo-Optic Switch with Low Power-Consumption

High efficiency thermal optical switch based on suspended polymer waveguide

Polymer M-Z Thermal Optical Switch at 532-Nm Based on Wet Etching and UV-Writing Waveguide.

650-Nm 1 × 2 Polymeric Thermo-Optic Switch with Low Power Consumption.

Flexible Waveguide Integrated Thermo-Optic Switch Based on TiO2 Platform

Low Switching Power 2×2 Thermo-Optic Switch Using Direct Ultraviolet Photolithography Process

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement