Abstract:By adopting polymer/silica hybrid rib waveguide structure,a low power-consumption Mach-Zehnder interferometer(MZI) thermo-optic switch is designed and fabricated with techniques including chemical vapor deposition(CVD),spin-coating,wet-etching,etc.The wavelength dispersions of waveguide core,buffer and cladding materials are measured,and output power and output spectrum are theoretically analyzed.Switching response and spectrum characteristics are measured using a tunable laser as input source.Under 1 550 nm wavelength,the driving power of the switch is about 7.8 mW,the extinction ratio between ON state and OFF state is up to 32.6 dB,and under the function of pure square-wave switching signal(peak-to-peak amplitude of 3Vpp),the rising time and falling time are 107 μs and 71 μs,respectively.Keeping applying the driving power at 1 550 nm wavelength on the device,the measured spectrum width is about 50 nm(1 520-1 570 nm) with an extinction ratio over 18 dB.A noise-level-tunable driving source is developed with NE555 and other integrated circuits,and then the driving-noise-tolerance characteristics are investigated.Experimental results indicate that the allowed maximum noise-level is about 1.1 Vpp with a required extinction ratio larger than 10 dB.The proposed results in this paper are of good meanings for practical applications of such thermo-optic switches with the hybrid waveguide structure.

Thermo-Optic Mode Switch Based on an Asymmetric Mach–Zehnder Interferometer

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Thermooptic Switch Based on Photonic-Crystal Line-Defect Waveguides

High efficiency thermal optical switch based on suspended polymer waveguide

Design and fabrication of MMI-MZI optical switch in GaAs/GaAlAs

Flexible Waveguide Integrated Thermo-Optic Switch Based on TiO2 Platform

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

&Lt;title>design and Fabrication of MMI-MZI Optical Switch in GaAs/GaAIAs</title>

Hitless Wavelength-Selective Switch Using a Single Microring Resonator Assisted With a Symmetric MZI

Fabrication and Driving-Noise-tolerance Characteristics of Wide-Spectrum Polymer Thermo-Optic Switch

Fast and Low-Power Thermo-Optic Switch Based on Organic-Inorganic Hybrid Strip-Loaded Waveguides.

Optical switch based on multimode interference coupler

Design and Analysis of a Polymer Mach-Zehnder Interferometer Electro-Optic Switch over a Wide Spectrum of &Lt;inline-Formula><math Display="inline" Overflow="scroll"><mrow><mn>110</mn><mspace Width="0.3em" /&Gt;<mi>nm</mi></mrow></math></inline-Formula>

A Compact Silicon Nano-Wire Waveguide Optic Switch

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

High-performance silicon polarization switch based on a Mach-Zehnder interferometer integrated with polarization-dependent mode converters

Compact 1 X N Thermo-Optic Switches Based on Silicon Photonic Wire Waveguides.

Polyimide-waveguide-based Thermal Optical Switch Using Total-Internal-reflection Effect

Polarization-insensitive Optical Switches Based on Mode-Insensitive Devices

Polarization-insensitive 2 × 2 Thermo-Optic Mach-Zehnder Switch on Silicon.

Polymeric Multimode Interference Mach–Zehnder Interferometer Electro-Optic Switch Using Embedded Coplanar Waveguide Electrode: Theory, Design, and Analysis