Abstract:The chopped carbon fiber reinforced SiC (C f /SiC) composite has been regarded as one of the excellent high-temperature structural materials for applications in aerospace and military fields. This paper presented a novel printing strategy using direct ink writing (DIW) of chopped fibers reinforced polymer-derived ceramics (PDCs) with polymer infiltration and pyrolysis (PIP) process for the fabrication of C f /SiC composites with high strength and low shrinkage. Five types of PDCs printing inks with different C f contents were prepared, their rheological properties and alignment of carbon fiber in the printing filament were studied. The 3D scaffold structures and bending test samples of C f /SiC composites were fabricated with different C f contents. The results found that the C f /SiC composite with 30 wt.% C f content has high bending strength (~ 7.09 MPa) and negligible linear shrinkage (~ 0.48%). After the PIP process, the defects on the C f /SiC composite structures were sufficiently filled, and the bending strength of C f /SiC composite can reach up to about 100 MPa, which was about 30 times greater than that of the pure SiC matrix without C f . This work demonstrated that the printed C f /SiC composites by using this method is beneficial to the development of the precision and complex high-temperature structural members.

Microstructure Control of Highly Oriented Short Carbon Fibres in SiC Matrix Composites Fabricated by Direct Ink Writing

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing

Microstructure and mechanical properties of continuous carbon fiber-reinforced SiC ceramic composite fabricated by direct ink writing

Additive manufacturing of Csf/SiC composites with high fiber content by direct ink writing and liquid silicon infiltration

Investigation on microstructure control of in-situ synthesized high-performance Cf/SiC composites

Microstructure and mechanical property of short fiber reinforced C/C-SiC composites

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Effects of In-Situ Carbon Layer and Volume Fraction of SiC Fiber on the Mechanical Properties and Fracture Behaviors of SiCf/SiC Composites Fabricated by a Modified PIP Method

Using Pyrolytic Carbon-Coated Short Carbon Fiber to Fabricate Csf/ZrB2-SiC Composites by Direct Ink Writing and Precursor Infiltration Pyrolysis

Direct Ink Writing of Chopped Carbon Fibers Reinforced Polymer-derived SiC Composites with Low shrinkage and High Strength

Fabrication of High‐strength Porous SiC‐based Composites with Unidirectional Channels

Microstructure and mechanical properties of 3D needled carbon fibre reinforced carbon and silicon carbide composites

Improving Mechanical Properties of SiCw/SiC Composite by Phase Content Optimization Via Reactive Melt Infiltration

Fabrication and mechanical properties of carbon fibers/lithium aluminosilicate ceramic matrix composites reinforced by in-situ growth SiC nanowires

Structure and fracture mechanism of short fibre reinforced C/C-SiC composites

Fabrication of dense Cf/SiC ceramic matrix composites using 3D printing and PIP with short carbon fibre as a toughening material

Fabrication of SiCf/SiC Composites by Chemical Vapor Infiltration and Vapor Silicon Infiltration

MICROSTRUCTURE OF 3D TEXTILE C/PYC/SIC COMPOSITES PREPARED BY CHEMICAL VAPOR INFILTRATION

Continuous carbon fiber reinforced ZrB2-SiC composites fabricated by direct ink writing combined with low-temperature hot-pressing