Abstract:Laser powder bed fusion (LPBF) has emerged as an effective method for preparing complex structured silicon carbide (SiC) ceramics. However, the SiC components demonstrate low strength and high brittleness, which remain major challenges limiting its application. To overcome this limitation, short carbon fiber reinforced silicon carbide (C sf /SiC) composites are prepared by combining LPBF and phenolic resin binder impregnation (PRBI)-reactive melt infiltration (RMI), in which high char yield boron -and silicone -containing phenolic resin (BSiPF) impregnation is used to adjust the carbon density of green bodies and to reduce the pore size of green bodies. By optimizing the impregnation process, the carbon density can be brought close to the theoretical optimal value of 0.84 g/cm 3 , and the reduction of the pore size is conducive to the improvement of the reaction rate at the early stage of the reaction, which enhance the SiC phase content of C s f /SiC composites obtained by RMI. Meanwhile, the application of BSiPF results in a protective pyrolytic carbon (PyC) coating on the surface of C sf , which can reduce the erosion of C sf by molten Si during the RMI process, thus improving the fracture toughness of C s f /SiC composites. The final C s f /SiC composites exhibit the enhanced bulk density, bending strength and fracture toughness, reaching 2.90 +/- 0.01 g/cm 3 , 257 +/- 20 MPa, 3.52 +/- 0.15 MPa m 1/2 , respectively. This study provides a new strategy for effective impregnation technique for the additive manufacturing (AM) of high strength and high toughness SiC composites.

Effects of In-Situ Carbon Layer and Volume Fraction of SiC Fiber on the Mechanical Properties and Fracture Behaviors of SiCf/SiC Composites Fabricated by a Modified PIP Method

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Processing and Characterization of C-F/Sic Composites

High Performance SiC/SiOC Composites with in Situ Carbon Interface

Microstructure and Properties of SiCw/SiC Composites Prepared by Gel-Casting Combined with Precursor Infiltration and Pyrolysis

High-performance 3D SiC/PyC/SiC Composites Fabricated by an Optimized PIP Process with a New Precursor and a Thermal Molding Method

Effect of Fabrication Process of Carbon Interlayer on Mechanical Properties of SiC_f/SiC Composites

Further Understanding of the Improved Mechanical Properties for SiCf/BN/SiC Composites Prepared by CVI+PIP Hybrid Technique: Application of Micro-Mechanical Methods

Fabrication of Cf/SiC composites by precursor infiltration and pyrolysis process

Fabrication, Microstructures and Properties of SiCf/SiC Composites Prepared with Two Kinds of SiC Fibers As Reinforcements

Fabrication of dense Cf/SiC ceramic matrix composites using 3D printing and PIP with short carbon fibre as a toughening material

Microstructure, Strength and Toughness of C/SiC Composite Modified by PIP-SiC Matrix

Short Carbon Fibers Reinforced SiC Composite and Dependence of C_f Fraction and Pressure on Its Properties

Mechanical properties and oxidation resistance of SiC f/CVI-SiC composites with PIP-SiC interphase

Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes

Effects of chopped carbon fiber on the forming, structure and mechanical properties of CCF/SiC composites fabricated by SLS and RMI

2.5-DIMENSION SiCf/SiC COMPOSITES FABRICATED BY LOW PRESSURE CHEMICAL VAPOR INFILTRATION

Mechanical Properties of SiCf/SiC Composites Reinforced by In-Situ Grown Carbon Nanotubes

High Strength and High Toughness Csf/SiC Composites Prepared by Laser Powder Bed Fusion/ Reactive Melt Infiltration with the Impregnation of Boron-and Silicone-Containing Phenolic Resin

Mechanical and Dielectric Properties of SiC F /sic Composites Fabricated by PIP Combined with CIP Process

Effects of Carbon Fiber CVD SiC Coatings on Mechanical Properties of C/SiC Composites