Abstract:Solution-processed polymeric semiconductor films are attracting wide interest for applications in flexible electronics, wherein environmental stability is still a big obstacle. In many polymeric thin-film electronic devices, vertical phase separation has been observed, which leads to film depth dependences of electronic properties. Here, a soft plasma-assisted surface etching method to improve the environmental stability and maintain the electronic properties of organic field-effect transistors (OFETs) is proposed, by which the unwanted thin-film surface (exposed to air) is selectively taken away upon soft plasma etching, and the layer beneath the surface (subsurface) is preserved without any damage to the subsurface's structure or electronic function. Investigation of frequently used polymeric semiconductors poly(3-hexylthiophene) and poly[4-(4,4-dihexadecyl-4H-cyclopenta[1,2-b:5,4b′]dithiophen-2-yl)-alt [1,2,5]thiadiazolo[3,4-c]pyridine] shows that the crystallinity of the surface layer is higher than that of the subsurface layer. However, for p-type polymeric semiconductors, higher crystallinity usually leads to a lower ionization energy and higher doping concentration during exposure to air and thus a higher background conductivity, deteriorating the switching-off capability of the organic field-effect transistors (OFETs). Therefore, by removing this surface layer, the lifetime of OFETs in air is effectively increased by over 50%.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.1c00628?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.1c00628</a>.Transfer curves ((−ID)1/2–VG) for unetched and etched P3HT transistors; output curves of unetched and etched P3HT transistors; on/off ratio and field-effect mobility of unetched and etched P3HT transistors; transfer curves of PCDTPT transistors measured in different conditions; transfer curves ((−ID)1/2–VG) for unetched and etched PCDTPT transistors; VON, field-effect mobility and SS–1 of unetched and etched PCDTPT transistors; output curves of unetched and etched PCDTPT transistors; schematic diagram and transfer curve PCDTPT transistor (etched before the deposition of electrodes); dual sweep transfer and output curves of P3HT and PCDTPT transistors; the effect of thickness on PCDTPT transistors performance; the effect of encapsulation on PCDTPT transistors performance; and the effect of crystallinity on DPP-DTT transistors performance (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.1c00628/suppl_file/cm1c00628_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Surface Catalytic Modification of Conjugated Polymer on Low‐Cost Bottom Contact for Improved Injection Efficiency of Organic Transistors

High-Performance Low-Cost Organic Field-Effect Transistors With Chemically Modified Bottom Electrodes

Inner‐Evaporator Modification of Low‐Cost Metal Electrodes of Organic Field‐Effect Transistors by 2D Polyporphyrin

Efficient modification of Cu electrode with nanometer-sized copper tetracyanoquinodimethane for high performance organic field-effect transistors.

Soft-Etching Copper and Silver Electrodes for Significant Device Performance Improvement Toward Facile, Cost-Effective, Bottom-Contacted, Organic Field-Effect Transistors.

High‐Performance Bottom‐Contact Organic Thin‐Film Transistors with Controlled Molecule‐Crystal/Electrode Interface

Directly Patterning Conductive Polymer Electrodes on Organic Semiconductor via In Situ Polymerization in Microchannels for High-Performance Organic Transistors

Remarkable Reduction in the Threshold Voltage of Pentacene-Based Thin Film Transistors with Pentacene/cupc Sandwich Configuration

Reduced contact resistance in top-contact organic field-effect transistors by interface contact doping

Single-Displacement Controlled Spontaneous Electrolysis Towards Cutcnq Microribbon Electrodes in Organic Single-Crystal Transistors

Organic Field-Effect Transistor with Low-Cost CuI/Al Bilayer Electrode

On the Role of Contact Resistance and Electrode Modification in Organic Electrochemical Transistors

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

Highly Conductive Ultrathin Layers of Conjugated Polymers for Metal-Free Coplanar Transistors with Single-Polymer Transport Layers

Lowering the Contact Barriers of 2D Organic F<sub>16</sub>CuPc Field-Effect Transistors by Introducing Van der Waals Contacts

Tuning Interfacial Properties by Spontaneously Generated Organic Interlayers in Top‐Contact‐Structured Organic Transistors

Mixing Insulating Commodity Polymers with Semiconducting n‐type Polymers Enables high‐Performance Electrochemical Transistors

Improving Charge Injection at Gold/Conjugated Polymer Contacts by Polymer Insulator-Assisted Annealing for Transistors.

Lowering the Contact Barriers of 2D Organic F 16 CuPc Field‐Effect Transistors by Introducing Van der Waals Contacts

Van Der Waals Metal-Semiconductor Contacts for High-Performance Polymer Field-Effect Transistors

Surface Etching of Polymeric Semiconductor Films Improves Environmental Stability of Transistors