Abstract:This study investigates the operational characteristics of AlGaN/GaN high-electron-mobility transistors (HEMTs) by applying a slant-gate structure and drain-side extended field-plate (FP) for improved breakdown voltage. Prior to the analysis of slant-gate-based HEMT, simulation parameters were extracted from the measured data of fabricated basic T-gate HEMTs to secure the reliability of the results. We suggest three different types of slant-gate structures that connect the basic T-gate electrode boundary to the 1st and 2nd SiN passivation layers obliquely. To consider both the breakdown voltage and frequency characteristics, the DC and RF characteristics of various slant-gate structures including the self-heating effect were analyzed by TCAD simulation. We then applied a drain-side extended FP to further increase the breakdown voltage. The maximum breakdown voltage was achieved at the FP length of 0.4 μm. Finally, we conclude that the slant-gate structures can improve breakdown voltage by up to 66% without compromising the frequency characteristics of the HEMT. When the drain-side FP is applied to a slant-gate structure, the breakdown voltage is further improved by up to 108%, but the frequency characteristics deteriorate. Therefore, AlGaN/GaN HEMTs with an optimized slant-gate-based structure can ultimately be a promising candidate for high-power and high-frequency applications.

Dua- eta-gate AlGaNiGaN HEMTs for Power Application

Dual-metal-gate AlGaN/GaN HEMTs for Power Application

AlGaN/GaN dual gate MOS HFET for power device applications

A Normally-off P-Gate AlGaN/GaN HEMT for High Power Application

Electrical and Thermal Characteristics of AlGaN/GaN HEMT Devices with Dual Metal Gate Structure: A Theoretical Investigation

High Breakdown AlGaN/GaN MOSHEMT with Thermal Oxidized Ni/Ti As Gate Insulator

High breakdown voltage AlGaN-GaN power-HEMT design and high current density switching behavior

Current-collapse Suppression and Leakage-Current Decrease in AlGaN/GaN HEMT by Sputter-Tan Gate-Dielectric Layer

A high breakdown voltage AlGaN/GaN MOSHEMT using thermal oxidized Al-Ti as the gate insulator

Study of Current Collapse Behaviors of Dual-Gate AlGaN/GaN HEMTs on Si

AlN/beta-Ga2O3 based HEMT: a potential pathway to ultimate high power device

Asymmetric GaN High Electron Mobility Transistors Design with InAlN Barrier at Source Side and AlGaN Barrier at Drain Side

Efficient III-Nitride MIS-HEMT devices with high-κ gate dielectric for high-power switching boost converter circuits

Simulation and analysis of enhancement-mode AlGaN/GaN HEMT with P-I-N junction gate

Analysis of Operational Characteristics of AlGaN/GaN High-Electron-Mobility Transistor with Various Slant-Gate-Based Structures: A Simulation Study

A new gate design combined MIS and p-GaN gate structures for normally-off and high on-current operation

Multilayer SiNx passivated Al2O3 gate dielectric featuring a robust interface for ultralong-lifetime AlGaN/GaN HEMT

Simulation and analysis of high breakdown voltage AlGaN/GaN MOSHEMTs with TiO2/Al2O3 gate dielectric

Normally-Off p-GaN Gated AlGaN/GaN MIS-HEMTs with ALD-Grown Al2O3/AlN Composite Gate Insulator

High-performance Normally off AlGaN/GaN High Electron Mobility Transistor with P-Type H-Bn Cap Layer

High-performance normally off p-GaN gate high-electron-mobility transistor with In 0.17 Al 0.83 N barrier layer design