Abstract:The leakage current suppression mechanism in AlGaN/GaN High Electron Mobility Transistors (HEMTs) is investigated. It is known that leakage current can cause severe reliability problems for HEMT devices and conventional AlGaN/GaN HEMT devices suffer from detrimental off-state drain leakage current issues, especially under high off-state drain bias. Therefore, a leakage current suppression technique featuring hybrid-Schottky/ohmic-drain contact is discussed. Through the 2-zones leakage current suppression mechanism by the hybrid-Schottky/drain metal including the shielding effect of the rough ohmic-drain metal morphology and the drain side electric field modulation, AlGaN/GaN HEMT featuring this novel technique can significantly enhance the leakage current suppression capability and improve the breakdown voltage. An analytical method using loop-voltage-scanning is proposed to illustrate the optimization procedure of the hybrid-Schottky/ohmic drain metallization on leakage current suppression. Through the comparison of the loop leakage current hysteresis of conventional ohmic drain HEMT and hybrid-Schottky/ohmic drain, the leakage current suppression mechanism is verified through the leakage current considering surface acceptor-like trap charging/discharging model. Device featuring the hybrid-Schottky/ohmic drain technique shows an improvement in breakdown voltage from 450 V (with no Schottky drain metal) to 855 V with a total drift region length of 9 mu m, indicating enhanced off-state reliability characteristics for the AlGaN/GaN HEMT devices. (C) 2014 Elsevier Ltd. All rights reserved.

Dual-metal-gate AlGaN/GaN HEMTs for Power Application

Dua- eta-gate AlGaNiGaN HEMTs for Power Application

AlGaN/GaN dual gate MOS HFET for power device applications

A Normally-off P-Gate AlGaN/GaN HEMT for High Power Application

High breakdown voltage AlGaN-GaN power-HEMT design and high current density switching behavior

Electrical and Thermal Characteristics of AlGaN/GaN HEMT Devices with Dual Metal Gate Structure: A Theoretical Investigation

Study of Current Collapse Behaviors of Dual-Gate AlGaN/GaN HEMTs on Si

Efficient III-Nitride MIS-HEMT devices with high-κ gate dielectric for high-power switching boost converter circuits

Analysis of Operational Characteristics of AlGaN/GaN High-Electron-Mobility Transistor with Various Slant-Gate-Based Structures: A Simulation Study

Current-collapse Suppression and Leakage-Current Decrease in AlGaN/GaN HEMT by Sputter-Tan Gate-Dielectric Layer

High Breakdown AlGaN/GaN MOSHEMT with Thermal Oxidized Ni/Ti As Gate Insulator

A high breakdown voltage AlGaN/GaN MOSHEMT using thermal oxidized Al-Ti as the gate insulator

Improving Performance and Breakdown Voltage in Normally-Off GaN Recessed Gate MIS-HEMTs Using Atomic Layer Etching and Gate Field Plate for High-Power Device Applications

Asymmetric GaN High Electron Mobility Transistors Design with InAlN Barrier at Source Side and AlGaN Barrier at Drain Side

Multilayer SiNx passivated Al2O3 gate dielectric featuring a robust interface for ultralong-lifetime AlGaN/GaN HEMT

A new gate design combined MIS and p-GaN gate structures for normally-off and high on-current operation

High-performance normally off p-GaN gate high-electron-mobility transistor with In 0.17 Al 0.83 N barrier layer design

High-performance Normally off AlGaN/GaN High Electron Mobility Transistor with P-Type H-Bn Cap Layer

Study of the Leakage Current Suppression for Hybrid-Schottky/ohmic Drain AlGaN/GaN HEMT

Simulation and analysis of enhancement-mode AlGaN/GaN HEMT with P-I-N junction gate

Design and electrical modelling of a depletion-mode P-type triple-field-plated AlGaN/GaN on SiC HEMT with 2.45 kV breakdown voltage