Abstract:Carbon nanotube field-effect transistors (CNTFETs) are increasingly recognized as a viable option for creating high-performance, low-power, and densely integrated circuits (ICs). Advancements in carbon-based electronics, encompassing materials and device technology, have enabled the fabrication of circuits with over 1000 gates, marking carbon-based integrated circuit design as a burgeoning field of research. A critical challenge in the realm of carbon-based very-large-scale integration (VLSI) is the lack of suitable automated design methodologies and infrastructure platforms. In this study, we present the development of a wafer-scale 3 μm carbon-based complementary metal-oxide-semiconductor (CMOS) process design kit (PDK) (3 μm-CNTFETs-PDK) compatible with silicon-based Electronic Design Automation (EDA) tools and VLSI circuit design flow. The proposed 3 μm-CNTFETs-PDK features a contacted gate pitch (CGP) of 21 μm, a gate density of 128 gates/mm 2 , and a transistor density of 554 transistors/mm 2 , with an intrinsic gate delay around 134 ns. Validation of the 3 μm-CNTFETs-PDK was achieved through the successful design and tape-out of 153 standard cells and 333-stage ring oscillator circuits. Leveraging the carbon-based PDK and a silicon-based design platform, we successfully implemented a complete 64-bit static random-access memory (SRAM) circuit system for the first time, which exhibited timing, power, and area characteristics of clock@10 kHz, 122.1 μW, 3795 μm × 2810 μm. This research confirms that carbon-based IC design can be compatible with existing EDA tools and silicon-based VLSI design flow, thereby laying the groundwork for future carbon-based VLSI advancements.

Process Design Kit and Design Automation for Flexible Hybrid Electronics

Process Design Kit for Flexible Hybrid Electronics.

Robust Design and Design Automation for Flexible Hybrid Electronics

ICCAD Tutorial Session Paper Ferroelectric FET Technology and Applications: From Devices to Systems

Full-Custom 90 nm CNTFET Process Design Kit: Characterization, Modeling, and Implementation

FreePDK15TFET: an Open-Source Process Design Kit for 15nm CMOS and TFET Devices.

Stretchable and Foldable Silicon Integrated Circuits

A New Frontier of Printed Electronics: Flexible Hybrid Electronics

(Invited) High-Performance Carbon Nanotube Based Flexible Electronics for Integrated Smart Sensor System

Wafer-scale carbon-based CMOS PDK compatible with silicon-based VLSI design flow

Development of a Predictive Process Design kit for15-nm FinFETs: FreePDK15

Ultrathin Silicon Circuits with Strain‐Isolation Layers and Mesh Layouts for High‐Performance Electronics on Fabric, Vinyl, Leather, and Paper

IGZO-TFT-PDK: Thin-Film Flexible Electronics Design Kit, Standard Cell and Design Methodology

Facial Fabrication of Paper-Based Flexible Electronics with Flash Foam Stamp Lithography

Flexible Circuits and Systems for Smart Biomedical Applications

Flexible Electronics: Ultrathin Silicon Circuits with Strain‐Isolation Layers and Mesh Layouts for High‐Performance Electronics on Fabric, Vinyl, Leather, and Paper (adv. Mater. 36/2009)

Carbon nanotube-based flexible electronics

Intrinsically Flexible All-Carbon-nanotube Electronics Enabled by a Hybrid Organic–inorganic Gate Dielectric

Low-voltage High-Performance Flexible Digital and Analog Circuits Based on Ultrahigh-Purity Semiconducting Carbon Nanotubes

The Integration of CNTs-based Flexible Tactile Sensor and Flexible Circuit by Polymer Molding Process

Dry-Transferable Photoresist Enabled Reliable Conformal Patterning for Ultrathin Flexible Electronics