Abstract:CNT/TPU filaments for the FDM process are prepared to improve the mechanical properties and add functionalities to the FDM‐printed parts, such as electrical conductivity and capacitive sensing performance, which increases the types of suitable materials for FDM and extends the application potential of FDM. As one of the widely used additive manufacturing technologies, FDM has been limited by small variety of available materials, poor mechanical properties, and lack of functionality of the FDM‐printed parts. In this study, CNT/TPU filaments are prepared, and their thermal behavior is determined to lay the foundation for FDM process. The effects of the CNT content on the mechanical and conductivity properties of FDM‐printed samples are investigated, and the FDM‐printed CNT/TPU dielectric layers are explored for capacitive sensing applications. The results show that the incorporation of CNT significantly affects their mechanical, electrical, and capacitive sensing properties. The addition of 6 wt.% CNT increases the tensile strength by 199%, the flexural strength by 34%, and the electrical resistivity from 1.35 × 1010 to 7.26 × 103 Ω sq−1. The sensitivity of the sensor with the FDM‐printed CNT/TPU dielectric layer microstructure is 0.04034 kPa−1 (0–20 kPa). The prepared CNT/TPU sensors have the advantages of wide detection range (0–800 kPa), a rapid response time (60 ms), and good repeatability, and have potential applications in detecting physical pressure, human motion, and human‐computer interaction. In conclusion, the CNT/TPU composite prepared in this study increases the types of suitable materials for FDM and expands the application potential of FDM.

The Integration of CNTs-based Flexible Tactile Sensor and Flexible Circuit by Polymer Molding Process

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique.

Development Of Patterned Carbon Nanotubes On A 3d Polymer Substrate For The Flexible Tactile Sensor Application

Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing

Parylene film Silicon substrate Conductive adhesive FPC Metal routing CNTs Via Cavity FPC PDMS substrate Parylene film CNTs Bump Metal

Development of 3D carbon nanotube interdigitated finger electrodes on polymer substrate for flexible capacitive sensor application

Development of 3D CNTS interdigitated finger electrodes on flexible polymer for bending strain measurement

A High-Resolution, Ultrabroad-Range and Sensitive Capacitive Tactile Sensor Based on a CNT/PDMS Composite for Robotic Hands.

Development of a 3D Distributed Carbon Nanotubes on Flexible Polymer for Normal and Shear Forces Measurement

Integration of PDMS-infiltrated CNTs and Si bulk-micromachining for monolithic physical sensors application

Flexible Tactile Sensor Array Based On Aligned Mwnts-Pu Composited Sub-Microfibers

Carbon Black/PDMS Based Flexible Capacitive Tactile Sensor for Multi-Directional Force Sensing

Rational Design of a Flexible CNTs@PDMS Film Patterned by Bio-Inspired Templates As a Strain Sensor and Supercapacitor

The Characteristics Study of the Flexible Pressure SensorBased on CNTs/PDMS Dielectric Layer

Implementation of A Flexible Silicon-Based Tactile Sensor Array

Emerging Functional Polymer Composites for Tactile Sensing

Structurally hierarchical flex-sensor of MWCNTs/TPU composite via mesh mould-based selective laser sintering (SLS) and ultrasonic cavitation-enabled treatment (UCT)

A Flexible Pressure Sensor Based on PDMS-CNTs Film for Multiple Applications

3D Printed Carbon Nanotubes Reinforced Polydimethylsiloxane Flexible Sensors for Tactile Sensing

Design and Fabrication of the Polyimide-Based Flexible MEMS Capacitive Tactile Force Sensor

3D Printing of Carbon Nanotube (CNT)/Thermoplastic Polyurethane (TPU) Functional Composites and Preparation of Highly Sensitive, Wide‐range Detectable, and Flexible Capacitive Sensor Dielectric Layers via Fused Deposition Modeling (FDM)