Abstract:The study of adhesion has received considerable attention in recent years, partly due to advances in the design and fabrication of micro/nano devices. Many adhesion investigations are centered on single-spherical-contact models, which include the classic Johnson-Kendall-Roberts (JKR), improved Derjaguin-Muller-Toporov (IDMT), and Maugis-Dugdale (MD) models. Based on the IDMT single-asperity model, adhesive rough surface contact models have also been developed, which are valid for elastic and elastic-plastic contact conditions. A limitation of the IDMT-based models is that they are only valid for application cases with low adhesion parameter values. In this research, a contacting rough surface adhesion model was developed by combining an extended Maugis-Dugdale (EMD) model (which is only valid for elastic contacts) with an IDMT-based elastic-plastic adhesion model. The proposed model, termed the elastic-plastic hybrid adhesion model, is valid for the entire adhesion parameter range and also for elastic-plastic contacts. The proposed model gives results similar to the EMD rough surface model when the contact is primarily elastic. Moreover, the proposed model was compared to an IDMT-based model (ISBL model) and both gave similar results for contacts with low adhesion parameter values. With high adhesion parameter values, the ISBL model fails, whereas the proposed model correctly predicts higher adhesion. Last, based on the stiffness of the external force, the instability for adhesive rough surfaces in contact was also discussed, and it was postulated that a high peak value of the external force stiffness directly relates to the unstable contact process.

An Investigation on the Behavior of Anisothermal Adhesive Contact Based on Maugis–Dugdale Model

Effect of Surface Tension on the Behavior of Adhesive Contact Based on Maugis‒Dugdale Model

Effect of shear stress on adhesive contact with a generalized Maugis-Dugdale cohesive zone model

Adhesive transition from noncontacting to contacting elastic spheres: extension of the Maugis-Dugdale model.

Effect of temperature difference on the adhesive contact between two spheres

A Molecular Dynamics Study on the Adhesive Contact with Effect of Tangential Forces

A GENERALIZED MAUGIS MODEL FOR ADHESIVE CONTACT OF ARBITRARY AXISYMMETRIC ELASTIC OBJECTS

Adhesive Contact Model and Calculation of Micro-Mechanical Systems

An Elastic–plastic Hybrid Adhesion Model for Contacting Rough Surfaces in the Presence of Molecularly Thin Lubricant

Analysis of Adhesive Contact of Heterogeneous Elastic Materials

Theory of Adhesive Contact on Multi-Ferroic Composite Materials: Conical Indenter

Generalized Maugis–Dugdale Model of an Elastic Cylinder in Non-Slipping Adhesive Contact with a Stretched Substrate

Mechanical modeling and characteristic study for the adhesive contact of elastic layered media

Adhesive contact between dissimilar cylinders subject to a temperature difference

Using the Dugdale Approximation to Match A Specific Interaction in the Adhesive Contact of Elastic Objects

A Molecular Dynamics Simulation Based Double-Hertz Model for Inclined Adhesive Contact Between Spheres

A Model for Computational Investigation of Elasto-Plastic Normal and Tangential Contact Considering Adhesion Effect

Adhesion Performances Between Two Orthotropic Solids Influenced by Temperature Increment

Revisiting the Maugis–Dugdale Adhesion Model of Elastic Periodic Wavy Surfaces

Adhesive Contact on Power-Law Graded Elastic Solids: the JKR–DMT Transition Using a Double-Hertz Model

On adhesive contact between spheres with rolling adhesion