Abstract:Surface roughness involved in elastic adhesion of solids may lead to an unstable loading process, which makes experimental characterization and theoretical modeling full of challenge. The full self-consistent model (FSCM) is the most accurate adhesion contact model in the continuum framework, but the strongly nonlinear coupling relationship between surface gap and interaction is very difficult to solve even with high-precision numerical calculation. In this paper, several techniques including the arc-length control method, the Riemann?Stieltjes integral, the adaptive mesh and the Newton?Raphson iterative method were employed in a new solving program to overcome the difficulty of numerical calculation. This calculation method has high efficiency and precision, and it gives a full force?displacement curve containing all possible stable and unstable equilibrium states. The full force?displacement curves for the adhesive contact of wavy surfaces are zigzag and some additional oscillations or minor roundabouts are observed, which have not been detected in the extended JKR and Maugis?Dugdale models. With the increase of surface roughness, the pull-off force first increases and then decreases, because the adhesion mode transforms from the simple contact mode to the multiple one. It is found that the pressure oscillation induced by waviness leads to interface strengthening for small roughness, and the limitation of the theoretical strength and the development of interface cavitation result in interface weakening for large roughness. Compared to the FSCM, the JKR theory significantly overestimates the pull-off forces for large surface roughness. The extended Maugis?Dugdale model is also invalid for large roughness, and if the step cohesive stress is determined by applying a condition of the identical pull-off force at the rigid limit, it can work well for small roughness.

Revisiting the Maugis–Dugdale Adhesion Model of Elastic Periodic Wavy Surfaces

A double-Westergaard model for adhesive contact of a wavy surface

Adhesion of Elastic Wavy Surfaces: Interface Strengthening/weakening and Mode Transition Mechanisms

Effect of Surface Tension on the Behavior of Adhesive Contact Based on Maugis‒Dugdale Model

Adhesive transition from noncontacting to contacting elastic spheres: extension of the Maugis-Dugdale model.

Generalized Maugis–Dugdale Model of an Elastic Cylinder in Non-Slipping Adhesive Contact with a Stretched Substrate

A GENERALIZED MAUGIS MODEL FOR ADHESIVE CONTACT OF ARBITRARY AXISYMMETRIC ELASTIC OBJECTS

Adhesion of smoothly flat-ended wedges

Effect of shear stress on adhesive contact with a generalized Maugis-Dugdale cohesive zone model

Plane Contact and Adhesion of Two Elastic Solids with an Interface Groove

The contact of elastic regular wavy surfaces revisited

Adhesive Contact on Randomly Rough Surfaces Based on the Double-Hertz Model

An Elastic–plastic Hybrid Adhesion Model for Contacting Rough Surfaces in the Presence of Molecularly Thin Lubricant

Adhesion between elastic cylinders based on the double-Hertz model

Analysis of Adhesive Contact of Heterogeneous Elastic Materials

Combined Dry and Wet Adhesion Between a Particle and an Elastic Substrate.

An Investigation on the Behavior of Anisothermal Adhesive Contact Based on Maugis–Dugdale Model

Adhesive Contact on Power-Law Graded Elastic Solids: the JKR–DMT Transition Using a Double-Hertz Model

Combined Effects of Viscoelasticity and Surface Roughness on the Adhesion Behavior of a Flat-End Cylindrical Microstructure

Viscoelastic Adhesive Contact Between a Sphere and a Two-Dimensional Nano-Wavy Surface

Using the Dugdale Approximation to Match A Specific Interaction in the Adhesive Contact of Elastic Objects