Abstract:The study of adhesion has received considerable attention in recent years, partly due to advances in the design and fabrication of micro/nano devices. Many adhesion investigations are centered on single-spherical-contact models, which include the classic Johnson-Kendall-Roberts (JKR), improved Derjaguin-Muller-Toporov (IDMT), and Maugis-Dugdale (MD) models. Based on the IDMT single-asperity model, adhesive rough surface contact models have also been developed, which are valid for elastic and elastic-plastic contact conditions. A limitation of the IDMT-based models is that they are only valid for application cases with low adhesion parameter values. In this research, a contacting rough surface adhesion model was developed by combining an extended Maugis-Dugdale (EMD) model (which is only valid for elastic contacts) with an IDMT-based elastic-plastic adhesion model. The proposed model, termed the elastic-plastic hybrid adhesion model, is valid for the entire adhesion parameter range and also for elastic-plastic contacts. The proposed model gives results similar to the EMD rough surface model when the contact is primarily elastic. Moreover, the proposed model was compared to an IDMT-based model (ISBL model) and both gave similar results for contacts with low adhesion parameter values. With high adhesion parameter values, the ISBL model fails, whereas the proposed model correctly predicts higher adhesion. Last, based on the stiffness of the external force, the instability for adhesive rough surfaces in contact was also discussed, and it was postulated that a high peak value of the external force stiffness directly relates to the unstable contact process.

Generalized Maugis–Dugdale Model of an Elastic Cylinder in Non-Slipping Adhesive Contact with a Stretched Substrate

Non-slipping Adhesive Contact of an Elastic Cylinder on Stretched Substrates

A GENERALIZED MAUGIS MODEL FOR ADHESIVE CONTACT OF ARBITRARY AXISYMMETRIC ELASTIC OBJECTS

Non-slipping Adhesive Contact Between Mismatched Elastic Cylinders

General Solution to Two-Dimensional Nonslipping JKR Model with a Pulling Force in an Arbitrary Direction

Effect of Surface Tension on the Behavior of Adhesive Contact Based on Maugis‒Dugdale Model

Non-slipping JKR Model for Transversely Isotropic Materials

Adhesive transition from noncontacting to contacting elastic spheres: extension of the Maugis-Dugdale model.

Effect of shear stress on adhesive contact with a generalized Maugis-Dugdale cohesive zone model

Non-slipping Adhesive Contact Between Mismatched Elastic Spheres: A Model of Adhesion Mediated Deformation Sensor

Revisiting the Maugis–Dugdale Adhesion Model of Elastic Periodic Wavy Surfaces

A Model of Adhesive Contact Between a Cylinder and a Substrate under Mixed-Mode Loading with Effect of Rolling Adhesion

Using the Dugdale Approximation to Match A Specific Interaction in the Adhesive Contact of Elastic Objects

An Investigation on the Behavior of Anisothermal Adhesive Contact Based on Maugis–Dugdale Model

On the Contact Width in Generalized Plain Strain JKR Model for Isotropic Solids

An Elastic–plastic Hybrid Adhesion Model for Contacting Rough Surfaces in the Presence of Molecularly Thin Lubricant

Adhesion between elastic cylinders based on the double-Hertz model

Adhesive Contact on Power-Law Graded Elastic Solids: the JKR–DMT Transition Using a Double-Hertz Model

Analysis of Adhesive Contact of Heterogeneous Elastic Materials

A Double-Hertz Model for Adhesive Contact Between Cylinders under Inclined Forces

Adhesion Between a Rigid Sphere and a Stretched Membrane Using the Dugdale Model