Abstract:In this two part series (Zunker and Kamrin, 2024), we present a contact model able to capture the response of interacting adhesive elastic-perfectly plastic particles under a variety of loadings. In Part I, we focus on elastic through fully-plastic contact with and without adhesion. For these contact regimes the model is built upon the method of dimensionality reduction which allows the problem of a 3D axisymmetric contact to be mapped to a corresponding problem of a 1D rigid indenter penetrating a bed of independent Hookean springs. Plasticity is accounted for by continuously varying the 1D indenter profile subject to a constraint on the contact pressure. Unloading falls out naturally, and simply requires lifting the 1D indenter out of the springs and tracking the force. By accounting for the incompressible nature of this plastic deformation, the contact model is able to capture multi-neighbor dependent effects such as increased force and formation of new contacts. JKR type adhesion is recovered seamlessly within the method of dimensionality reduction by simply allowing the springs to ‘stick’ to the 1D indenter’s surface. Because of the mechanics-focused formulation of the contact model, only a few physical inputs describing the interacting particles are needed: particle radius, Young’s modulus, Poisson ratio, yield stress, and effective surface energy. The contact model is validated against finite element simulations and analytic theory—including Hertz’s contact law and the JKR theory of adhesion. These comparisons show that the proposed contact model is able to accurately capture plastic displacement, average contact pressure, contact area, and force as a function of displacement for contacts as well as particle volume within the elastic to fully-plastic regimes.

Adhesive Contact on Power-Law Graded Elastic Solids: the JKR–DMT Transition Using a Double-Hertz Model

Mechanics of adhesive contact on a power-law graded elastic half-space

A Generalized Maugis-Dugdale Solution for Adhesion of Power-Law Graded Elastic Materials

Mechanics of non-slipping adhesive contact on a power-law graded elastic half-space

Effect of shear stress on adhesive contact with a generalized Maugis-Dugdale cohesive zone model

Generalized Maugis–Dugdale Model of an Elastic Cylinder in Non-Slipping Adhesive Contact with a Stretched Substrate

Combined Dry and Wet Adhesion Between a Particle and an Elastic Substrate.

A mechanically-derived contact model for adhesive elastic-perfectly plastic particles. Part I: Utilizing the method of dimensionality reduction

Exact Axisymmetric Adhesive Contact Analysis for a Pre-Deformed Soft Electroactive Half-Space

Adhesive Contact Mechanics: from Deterministic to Stochastic Description

Mechanics of elliptical JKR-type adhesive contact

Adhesive contact between a rigid toroidal indenter and an elastic half-space

Non-slipping Adhesive Contact of an Elastic Cylinder on Stretched Substrates

The role of adhesion in contact mechanics

Analysis of Adhesive Contact of Heterogeneous Elastic Materials

Finite Element Analysis of Adhesive Contact Behaviors in Elastoplastic and Viscoelastic Media

A mechanically-derived contact model for adhesive elastic-perfectly plastic particles, Part I: Utilizing the method of dimensionality reduction

Effects of Surface Tension on the Adhesive Contact Between A Hard Sphere and A Soft Substrate

On Boussinesq's Problem for a Power-Law Graded Elastic Half-Space on Elliptical and General Contact Domains

Maugis-Tabor Parameter Dependence of Pull-off in Viscoelastic Line Hertzian Contacts

A Molecular Dynamics Study on the Adhesive Contact with Effect of Tangential Forces