Abstract:In this paper, three-dimensional exact solutions of adhesive contact between a pre-deformed compressible soft electroactive half-space and an axisymmetric rigid indenter are presented. The change of surface adhesion energy during the contact is examined by using the modified JKR model, which accounts for the real contact area instead of the projected area. With the help of new results in the potential theory method, all physical (field) variables are derived in terms of elementary functions for three common types of axisymmetric indenters (flat-ended, conical, and spherical). The analytical contact relations for different indenter geometries and material properties are provided and summarized in Tables 2 and 3 to serve a solid base for revealing the underlying electromechanical mechanism of soft electroactive materials. For numerical illustration, neo-Hookean isotropic electroactive material is considered. The simulation results clearly demonstrate that both the mechanical and electric biasing fields significantly affect the indentation measurement of the electroactive material. Moreover, at either micro- or nano-scale, adhesion plays a prominent role in the indentation responses. It is of interest that, even without adhesion, the normal stress somewhere in the contact region may become tensile under a prescribed pre-stretch when the biasing electric displacement exceeds a certain value. This abnormal phenomenon actually corresponds to surface instability of the half-space under the biasing field. In the case of adhesive contact, other than the surface instability, the value of surface adhesion energy between the probe and the sample will impose a constraint on the validity of indentation analysis within the linear elastic regime.

Effects of Surface Tension on the Adhesive Contact Between A Hard Sphere and A Soft Substrate

Indentation of a rigid sphere into an elastic substrate with surface tension and adhesion

Effects of surface tension on axisymmetric Hertzian contact problem

A Model for Computational Investigation of Elasto-Plastic Normal and Tangential Contact Considering Adhesion Effect

Combined Dry and Wet Adhesion Between a Particle and an Elastic Substrate.

Influence Of Surface Tension On Fractal Contact Model

Α Model of Computation of Elastic and Plastic Contact Considering Adhesion Effect

Adhesive Contact of Elastic Solids with Self-Affine Fractal Rough Surfaces

Indentation of a two-dimensional bonded elastic layer with surface tension

Mechanics of adhesive contact on a power-law graded elastic half-space

A Molecular Dynamics Study on the Adhesive Contact with Effect of Tangential Forces

Effect of shear stress on adhesive contact with a generalized Maugis-Dugdale cohesive zone model

Finite Element Simulation and Analysis of Nano-Scale Adhesive Contacts

Analysis of Adhesive Contact of Heterogeneous Elastic Materials

Two-dimensional Hertzian contact problem with surface tension

Finite Element Analysis of Adhesive Contact Behaviors in Elastoplastic and Viscoelastic Media

Strain-dependent solid surface stress and the stiffness of soft contacts

Two-dimensional finite element analysis of elastic adhesive contact of a rough surface

A new impact dynamics model of a clearance joint considering the adhesive effects in space environment

Exact Axisymmetric Adhesive Contact Analysis for a Pre-Deformed Soft Electroactive Half-Space

Adhesive Contact on Power-Law Graded Elastic Solids: the JKR–DMT Transition Using a Double-Hertz Model