Abstract:A full self-consistent model (FSCM) of the axisymmetric adhesive contact between a rigid punch with an arbitrary surface shape and a power-law graded elastic half-space is developed. The self-consistent equation between the surface gap and the surface interaction (e.g., the Lennard-Jones force law) involves a nonlinear singular integral, posing a great challenge to numerical calculations. By applying the properties of Gauss's hypergeometric function, the integral singularity is eliminated in the numerical calculation through Riemann-Stieltjes integral. Case studies for power-law punch profiles are performed and the self-consistent equation can be expressed in a dimensionless form with three dimensionless parameters, namely a shape index, a gradient exponent, and a new generalized Tabor number. The FSCM results are obtained by solving the self-consistent equation through the surface central gap control method and Newton-Raphson iterative method. For large generalized Tabor numbers, the force- displacement curves are 'S-shaped' and condense to the extended JKR limit in the high-load branch. As the generalized Tabor number decreases, a continuous transition from the extended JKR model to the Bradley model for the adhesion of power-law graded materials is obtained. It is found that the pull-off force of a graded material usually depends on the three dimensionless parameters, but for some cases of the shape index, it is not sensitive to the gradient exponent when the generalized Tabor number is fixed. Asymptotic solutions are derived to predict the unstable jump points, which coincide well with the FSCM predictions. The FSCM is applied to validate the extended Maugis-Dugdale (M-D) model of graded materials and it is found that the accuracy of the original M-D-n-k model using the maximum strength condition to determine the cohesive stress is limited. By introducing the rigid-limit-consistency condition of the pull-off force to determine the cohesive stress, the M-D-n-k model is improved and its predictions show good consistency with the FSCM results.

A Generalized Maugis-Dugdale Solution for Adhesion of Power-Law Graded Elastic Materials

Adhesion of Graded Elastic Materials: A Full Self-Consistent Model and Its Application

A Unified Treatment of Axisymmetric Adhesive Contact on A Power-Law Graded Elastic Half-Space

Mechanics of Axisymmetric Adhesive Contact of Rough Surfaces Involving Power-Law Graded Materials

Adhesive Contact on Power-Law Graded Elastic Solids: the JKR–DMT Transition Using a Double-Hertz Model

Mechanics of non-slipping adhesive contact on a power-law graded elastic half-space

An Analytical Self-Consistent Model for the Adhesion of Gibson Solid

On the Contact and Adhesion of a Piezoelectric Half-Space under a Rigid Punch with an Axisymmetric Power-Law Profile

Nanoadhesion of a Power-Law Graded Elastic Material

Mechanics of adhesive contact on a power-law graded elastic half-space

Adhesive Behavior of Two-Dimensional Power-Law Graded Materials

Using the Dugdale Approximation to Match A Specific Interaction in the Adhesive Contact of Elastic Objects

Adhesive Contact Problem Of Functionally Graded Materials Coated Half-Space

Adhesive Contact Between Flat Punches with Finite Edge Radius and an Elastic Half-Space

Adhesive Contact of A Power-Law Graded Elastic Half-Space with A Randomly Rough Rigid Surface

Sliding Contact Between A Cylindrical Punch and A Graded Half-Plane with an Arbitrary Gradient Direction

Partial Slip Contact Between a Rigid Punch with an Arbitrary Tip-Shape and an Elastic Graded Solid with a Finite Thickness

A generalized JKR-model for two-dimensional adhesive contact of transversely isotropic piezoelectric half-space

A GENERALIZED MAUGIS MODEL FOR ADHESIVE CONTACT OF ARBITRARY AXISYMMETRIC ELASTIC OBJECTS

Mode-mixity-dependent adhesion of power-law graded elastic solids under normal load and substrate stretch-induced mismatch strain

Double Contact Analysis Of Multilayered Elastic Structures Involving Functionally Graded Materials