Abstract:There is still a challenge to realize controllable attachment and detachment in the adhesive devices. New approaches of the controllable or reversible adhesion need to be developed in a wider area. In order to study the influence of the electric and magnetic quantities on the reversible adhesion, the adhesive contact problem between a half-space of the multi-ferroic composite material and a rigid conical indenter is investigated. The classical Johnson–Kendall–Roberts (JKR) and Maugis–Dugdale (MD) models are extended to the framework of magneto-electro-elasticity. The corresponding physical fields are analytically obtained. With the help of the Griffith energy balance relations, the stable equilibrium states of the adhesive contact are established. The corresponding indentation forces and the penetration depths for the JKR and MD models are derived in the closed-form. It is found that the pull-out forces associated with the JKR model depend on the electric potential and magnetic potential in certain cases. The validity is discussed by comparing the obtained solutions with the experimental data in the context of the elasticity. Numerical results show that the adhesive contact behaviors may be adjusted and controlled by changing the electric potential, the magnetic potential and the half apex angle of the rigid conical indenter. The present analytical results not only are the theoretical fundament for the forthcoming indentation experiments at the micro/nanoscopic scale, surface force microscopy (SFM) and atomic force microscopy (AFM), but also serve as guiding bionic design of the robots and grippers with reverse adhesion.

Adhesive contact between dissimilar cylinders subject to a temperature difference

Effect of temperature difference on the adhesive contact between two spheres

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

Adhesion Performances Between Two Orthotropic Solids Influenced by Temperature Increment

An Investigation on the Behavior of Anisothermal Adhesive Contact Based on Maugis–Dugdale Model

Theory of Adhesive Contact on Multi-Ferroic Composite Materials: Conical Indenter

Study on Thermoelastic Contact of Cylinder Head-Cylinder Head Gasket-Engine Block

A Molecular Dynamics Study on the Adhesive Contact with Effect of Tangential Forces

A Double-Hertz Model for Adhesive Contact Between Cylinders under Inclined Forces

A Model of Adhesive Contact Between a Cylinder and a Substrate under Mixed-Mode Loading with Effect of Rolling Adhesion

A Mechanical Model for the Adhesive Contact with Local Sliding Induced by a Tangential Force

Non-slipping Adhesive Contact Between Mismatched Elastic Cylinders

Adhesion between elastic cylinders based on the double-Hertz model

Effect of Temperature on Adhesion Behavior of Layered Piezoelectric Structure

Non-Slipping Adhesive Contact Between Dissimilar Elastic Solids under Normal and Tangential Loads

A Molecular Dynamics Simulation Based Double-Hertz Model for Inclined Adhesive Contact Between Spheres

A Multiscale Modeling Approach to Adhesive Contact

Analysis of Adhesive Contact of Heterogeneous Elastic Materials

Non-slipping adhesive contact of a rigid cylinder on an elastic power-law graded half-space

On adhesive contact between spheres with rolling adhesion

Adhesive Contact Model and Calculation of Micro-Mechanical Systems