Abstract:In order to improve the detection accuracy and range of new generation of Forward Looking Infra-Red (FLIR) system for distant targets, its optical system, which usually consists of a fore afocal telescope and rear imaging lenses, is required to has wide spectral range, large entrance pupil aperture, and wide field of view (FOV). In this paper, a new afocal Three-Mirror Anastigmat (TMA) with widened field of view and high demagnification is suggested. Its mechanical structure remains coaxial, but it has zigzag optical axis through properly and slightly decentering and tilting of the three mirrors to avoid its secondary obscuration due to the third mirror as FOV increase. Compared with conventional off-axis TMA, the suggested zigzag-axis TMA is compact, easy-alignment and low-cost.The design method and optimum result of the suggested afocal TMA is presented. Its initial structural parameters are determined with its first-order relationship and primary aberration theory. Slight and proper decentration and tilt of each mirror is leaded in optimization so that its coaxial mechanical structure is held but attainable FOV and demagnification are respectively as wide and as high as possible. As an example, a 5.5-demagnification zigzag-axis afocal TMA with a wavelength range, an entrance pupil diameter, and FOV respectively from 3 mu m to 12 mu m, of 320mm, and 2x3.2 degrees and with a real exit pupil, is designed. Its imaging quality is diffraction limited. It is suitable for fore afocal telescope of the so-called third generation FLIR.

Optical Design of Wide Field View and Large Relative Aperture Off-axis Three-mirror Reflective System with Tilted Optical Axis

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Off-axis Three-Mirror Freeform Optical System with Large Linear Field of View

Design of Off-Axis Three-Mirror Systems with Ultrawide Field of View Based on an Expansion Process of Surface Freeform and Field of View.

Optical Design of Three-Mirror Telescope System

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Design Method for Freeform Off-Axis Three-Mirror Anastigmat Optical Systems with a Large Field of View and Low Error Sensitivity

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Off-axis Three-Mirror Freeform Telescope with a Large Linear Field of View Based on an Integration Mirror.

Design of a high throughput telescope based on scanning off-axis Three-Mirror Anastigmat system

Optical System Design with High Resolution and Large Field of View for the Remote Sensor

Design of a Large Field of View and Low-Distortion Off-Axis Optical System Based on a Free-Form Surface

Design of Compact Freeform Off-Axis TMA System

Easy-aligned Off-Axis Three-Mirror System with Wide Field of View Using Freeform Surface Based on Integration of Primary and Tertiary Mirror.

Afocal Three-Mirror Anastigmat with Zigzag Optical Axis for Widened Field of View and Enlarged Aperture

Designing an All-Reflective, Long Focus and Large Field of View Optical System with Freeform Surface

Design of a Linear Field-of-view Oblique Imaging System with a Low Distortion.

Design of an Off-Axis Three-Mirror System with High Speed for Hyperspectral Imagers

Optical Design for Off-Axis Three-Mirror Two-Channel Imaging System with Freeform Surfaces

Optical Design of Free-Form Surface Two-Mirror Telescopic Objective with Ultra Wide Field of View

Off-axis Four-Mirror Telescope with a Wide Field of View and a Long Focal Length Using Double Integrated Mirrors.