Abstract:We present the development of a compact f/7.3 (D=35 mm) three-mirror reflective telescope for the atmospheric-research microsatellite Mesospheric Airglow/Aerosol Tomography Spectroscopy (MATS). The telescope design was driven by the end users' need for a reflective wide-field (5.67°×0.91°) optic with high stray light rejection and six detection channels with separate image sensors, operating at wavelengths 270-772 nm. For the first time, a design method for wide-field off-axis telescopes-in which linear astigmatism is eliminated-was applied and tested in practice. Single-point diamond turning was used to produce two sets of 37-110 mm large free-form aluminum mirrors with surface figure errors and roughness values of 34-62 nm (RMS)/193-497 nm (PV) and 2.8-3.5 nm (RMS), respectively. A method that combines precise machining and geometry measurements (using a coordinate measuring machine) was employed to fabricate an aluminum structure to accurately position the mirrors without the need for manual alignment. The telescope was tested with a network of plate beamsplitters and filters, which define the spectral selection for the six detection channels. Imaging performance measurements were carried out using a reflective off-axis collimator, which projects imaging targets at infinite focus. A modulation transfer function (MTF) value of 0.45 at 20 lp/mm was measured at ∼760 nm (diffraction limit: 0.85) using a slanted edge target. By modeling the measured mirror surfaces in optical design software, a reoptimization of the mirror positions could be performed and an improved MTF of ∼0.75 at 20 lp/mm was predicted. The results demonstrate design- and building methods that can be utilized to make off-axis telescopes for a vast range of applications.

Optical design of an off-axis Five-mirror-anastigmatic Telescope for Near Infrared Remote Sensing

An Optical Design Of Off-Axis Four-Mirror-Anastigmatic Telescope For Remote Sensing

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Design of a high throughput telescope based on scanning off-axis Three-Mirror Anastigmat system

Design of a Panoramic Annular Lens with a Horizontal Symmetric FOV

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Design of a Low F-number Freeform Off-Axis Three-Mirror System with Rectangular Field-of-view

Compact Three Mirror Anastigmat Space Telescope Design using 6.5m Monolithic Primary Mirror

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

4-Mirror Spherical-Primary Submillimeter Telescope Design

The design and assembly of a long-focal-length telescope with aluminum mirrors

Design Method for Freeform Off-Axis Three-Mirror Anastigmat Optical Systems with a Large Field of View and Low Error Sensitivity

Development of Linear Astigmatism Free -- Three Mirror System (LAF-TMS)

Design of a Spaceborne, Compact, Off-Axis, Multi-Mirror Optical System Based on Freeform Surfaces

Wide-field off-axis telescope for the Mesospheric Airglow/Aerosol Tomography Spectroscopy satellite

Active optics in astronomy - Freeform mirror for the MESSIER telescope proposal

Panopticon: a telescope for our times

An off-axis, wide-field, diffraction-limited, reflective Schmidt Telescope

A new configuration for a 10-metre optical/infrared telescope

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion