Abstract:Directional solidification of A1-4.5Cu alloy refined by adding Al-5Ti-1B has been carried out to investigate the texture formation and grain boundary characteristic of the paramagnetic crystal under a high magnetic field. OM and EBSD were applied to analyze the microstructures solidified at different temperature gradients (G) and magnetic field intensities (B). The results show that at the temperature gradient of 27 K/cm; the orientations of fcc alpha-Al grains without magnetic field are random. However, as a high magnetic field is imposed, the easy magnetization axes < 310 > of the alpha-Al grains are aligned parallel to the direction of the magnetic field leading to < 310 > texture. Meanwhile, the ratio of coincidence site lattice (CSL) grain boundaries increases with the increment of magnetic field intensity and reaches its maximum value at 4 T, but decreases as the magnetic field enhances further. On the other hand, when the temperature gradient is elevated, columnar dendrite morphology is exhibited without magnetic field; while a 6 T high magnetic field is introduced, the columnar dendrites are broken and equiaxed grains of random orientations are obtained. The alignment behavior of the free crystals in melt could be attributed to the magnetic crystalline anisotropy of alpha-Al. Moreover, the influence of fluid flow on the texture formation and CSL grain boundary development under magnetic field is discussed. The absence of convection is benefit for grain reorientation and CSL boundary formation. The application of high static magnetic field will inhibit the macro-scale convection. However, the interaction between thermoelectric current and magnetic field will cause micro-scale fluid flow, i.e., thermoelectric magnetic convection (TEMC). The TEMC will give rise to perturbation near the solid-liquid interface leading to the appearance of freckles as well as the decreasing of the ratio of CSL boundary. Moreover, it is proposed that the formation of CSL boundary is associated with the rotation of the free grains in melt along specific crystallographic axes by magnetic torque.

Three Dimensional Dendritic Morphology and Orientation Transition Induced by High Static Magnetic Field in Directionally Solidified Al-10 Wt.%zn Alloy

Effect of a Weak Transverse Magnetic Field on the Morphology and Orientation of Directionally Solidified Al–Ni Alloys

Effect of a High Magnetic Field on the Growth of Ε-Cuzn5 Dendrite During Directionally Solidified Zn-rich Zn–Cu Alloys

Investigation on the Formation Mechanism of Irregular Dendrite During Directional Solidification of Al–Cu Alloys under a High Magnetic Field

Effect of an Axial High Magnetic Field on Sn Dendrite Morphology of Pb–Sn Alloys During Directional Solidification

Control of Dendrite Growth by A Magnetic Field During Directional Solidification

Influence of an Axial Magnetic Field on Microstructures and Alignment in Directionally Solidified Ni-based Superalloy

Effect of a High Axial Magnetic Field on the Structure of Directionally Solidified Al–Si Alloys

Investigation on Macrosegregation and Dendrite Morphology During Directional Solidification of Al-Cu Hypereutectic Alloys under A Strong Magnetic Field

EFFECT OF HIGH LONGITUDINAL MAGNETIC FIELD ON THE MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED Al-4.5%Cu ALLOY

Effect of a Transverse Magnetic Field on Solidification Structure in Directionally Solidified Sn–Pb Hypoeutectic Alloys

Effect of a Transverse Magnetic Field on Solidification Structure in Directionally Solidified Al-40 Wt% Cu Alloys

Effect of thermoelectric magnetic force on the array of dendrites during directional solidification of Al–Cu alloys in a high magnetic field

Faceted Growth Of Primary Al2cu Crystals During Directional Solidification In High Magnetic Field

Effect of high magnetic field on the primary dendrite arm spacing and segregation of directionally solidified superalloy DZ417G

Thermal and Solute Diffusion During Dendrite Growth of Mg-5wt.%Zn Alloy

Effect of Horizontal Magnetic Field on the Microstructure of Directionally Solidified Ni-Based Superalloy

Non-axially Oriented Dendritic Microstructures and Their Mechanical Characteristics of Single-Crystal Al-4.5%Cu Alloy

On the Formation of Gradient-Distributed Dendrites in a Single Crystal Nickel-Based Superalloy Directionally Solidified under Transverse Static Magnetic Field

Dendrite morphology in Al-20 wt%Cu hypoeutectic alloys in 24 T high magnetic field quantified by ex-situ X-ray tomography

Texture Formation and Grain Boundary Characteristic of A1-4.5cu Alloys Directionally Solidified under High Magnetic Field