Abstract:Directional solidification of A1-4.5Cu alloy refined by adding Al-5Ti-1B has been carried out to investigate the texture formation and grain boundary characteristic of the paramagnetic crystal under a high magnetic field. OM and EBSD were applied to analyze the microstructures solidified at different temperature gradients (G) and magnetic field intensities (B). The results show that at the temperature gradient of 27 K/cm; the orientations of fcc alpha-Al grains without magnetic field are random. However, as a high magnetic field is imposed, the easy magnetization axes < 310 > of the alpha-Al grains are aligned parallel to the direction of the magnetic field leading to < 310 > texture. Meanwhile, the ratio of coincidence site lattice (CSL) grain boundaries increases with the increment of magnetic field intensity and reaches its maximum value at 4 T, but decreases as the magnetic field enhances further. On the other hand, when the temperature gradient is elevated, columnar dendrite morphology is exhibited without magnetic field; while a 6 T high magnetic field is introduced, the columnar dendrites are broken and equiaxed grains of random orientations are obtained. The alignment behavior of the free crystals in melt could be attributed to the magnetic crystalline anisotropy of alpha-Al. Moreover, the influence of fluid flow on the texture formation and CSL grain boundary development under magnetic field is discussed. The absence of convection is benefit for grain reorientation and CSL boundary formation. The application of high static magnetic field will inhibit the macro-scale convection. However, the interaction between thermoelectric current and magnetic field will cause micro-scale fluid flow, i.e., thermoelectric magnetic convection (TEMC). The TEMC will give rise to perturbation near the solid-liquid interface leading to the appearance of freckles as well as the decreasing of the ratio of CSL boundary. Moreover, it is proposed that the formation of CSL boundary is associated with the rotation of the free grains in melt along specific crystallographic axes by magnetic torque.

Faceted Growth Of Primary Al2cu Crystals During Directional Solidification In High Magnetic Field

Effect of a Low Axial Magnetic Field on the Primary Al2Cu Phase Growth in a Directionally Solidified Al–Cu Hypereutectic Alloy

EFFECT OF HIGH LONGITUDINAL MAGNETIC FIELD ON THE MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED Al-4.5%Cu ALLOY

Effect of a Transverse Magnetic Field on Solidification Structure in Directionally Solidified Al-40 Wt% Cu Alloys

Effect of a transverse magnetic field on the growth of equiaxed grains during directional solidification

Effect of a High Magnetic Field on the Growth of Ternary Al-Cu-Ag Alloys During Directional Solidification

Study of Faceted Al2Cu Intermetallic Compounds Growth During Solidification under Strong Static Magnetic Field Via X-ray Computed Tomography

Texture Formation and Grain Boundary Characteristic of A1-4.5cu Alloys Directionally Solidified under High Magnetic Field

Influence of a High Magnetic Field on the Precipitation Behavior of the Primary Al3Fe Phase During the Solidification of a Hypereutectic Al-3.31 Wt% Fe Alloy

Effect of A High Magnetic Field on the Morphological and Crystallographic Features of Primary Al6mn Phase Formed During Solidification Process

EFFECT OF LONGITUDINAL MAGNETIC FIELD ON THE MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED Al-40%Cu HYPEREUTECTIC ALLOY

Investigation on Macrosegregation and Dendrite Morphology During Directional Solidification of Al-Cu Hypereutectic Alloys under A Strong Magnetic Field

Influence of a High Magnetic Field on the Solidification Structures of Ternary Al–Fe–Zr Alloy

Directional Growth Behavior of Α(al) Dendrites During Concentration-Gradient-controlled Solidification Process in Static Magnetic Field

Directional Solidification of Al-8 Wt. % Fe Alloy under High Magnetic Field Gradient

Microstructure development in eutectic Al–Fe alloy during directional solidification under high magnetic fields at different growth velocities

Three Dimensional Dendritic Morphology and Orientation Transition Induced by High Static Magnetic Field in Directionally Solidified Al-10 Wt.%zn Alloy

Magnetostriction Increase of Tb0.3dy0.7fe1.95 Alloy Prepared by Solidification in High Magnetic Fields

Effect of a High Magnetic Field on the Growth of Ε-Cuzn5 Dendrite During Directionally Solidified Zn-rich Zn–Cu Alloys

Effect of a High Axial Magnetic Field on the Structure of Directionally Solidified Al–Si Alloys

Effects of a High Magnetic Field on the Primary Zinc-Rich Crystals in Hypoeutectic Zn-Sn Alloy