Abstract:Directional solidification of A1-4.5Cu alloy refined by adding Al-5Ti-1B has been carried out to investigate the texture formation and grain boundary characteristic of the paramagnetic crystal under a high magnetic field. OM and EBSD were applied to analyze the microstructures solidified at different temperature gradients (G) and magnetic field intensities (B). The results show that at the temperature gradient of 27 K/cm; the orientations of fcc alpha-Al grains without magnetic field are random. However, as a high magnetic field is imposed, the easy magnetization axes < 310 > of the alpha-Al grains are aligned parallel to the direction of the magnetic field leading to < 310 > texture. Meanwhile, the ratio of coincidence site lattice (CSL) grain boundaries increases with the increment of magnetic field intensity and reaches its maximum value at 4 T, but decreases as the magnetic field enhances further. On the other hand, when the temperature gradient is elevated, columnar dendrite morphology is exhibited without magnetic field; while a 6 T high magnetic field is introduced, the columnar dendrites are broken and equiaxed grains of random orientations are obtained. The alignment behavior of the free crystals in melt could be attributed to the magnetic crystalline anisotropy of alpha-Al. Moreover, the influence of fluid flow on the texture formation and CSL grain boundary development under magnetic field is discussed. The absence of convection is benefit for grain reorientation and CSL boundary formation. The application of high static magnetic field will inhibit the macro-scale convection. However, the interaction between thermoelectric current and magnetic field will cause micro-scale fluid flow, i.e., thermoelectric magnetic convection (TEMC). The TEMC will give rise to perturbation near the solid-liquid interface leading to the appearance of freckles as well as the decreasing of the ratio of CSL boundary. Moreover, it is proposed that the formation of CSL boundary is associated with the rotation of the free grains in melt along specific crystallographic axes by magnetic torque.

Analysis on the Crystallographic Orientation of Micro-Area under High Magnetic Field

Crystallographic orientation variation of isothermal pearlite under high magnetic field

An integrated exploration from microstructure to mechanics in austenite to pearlite transformation of high carbon steel under high magnetic fields

EBSD Study of the Influence of a High Magnetic Field on the Microstructure and Orientation of the Al-Si Eutectic During Directional Solidification

Effect of a High Axial Magnetic Field on the Structure of Directionally Solidified Al–Si Alloys

Effects of high magnetic field on isothermal pearlite transformation and microstructure in a hypereutectoid steel

Effect of High Magnetic Field on the Recovery of Tempered Martensite

Insights into the High Magnetic Field-Induced Austenite Formation in Medium Manganese Steel

Faceted Growth Of Primary Al2cu Crystals During Directional Solidification In High Magnetic Field

EFFECT OF HIGH LONGITUDINAL MAGNETIC FIELD ON THE MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED Al-4.5%Cu ALLOY

Effects of high magnetic field on austenite formation and grain size in a hypereutectoid carbon steel

EBSD Study on the Effect of a Strong Axial Magnetic Field on the Microstructure and Crystallography of Al-Ni Alloys During Solidification

Magnetic Field Effects on Crystallization of Iron-Based Amorphous Alloys

Effect of High Magnetic Field Treatment on the Microstructure and Mechanical Property of Nial-Cr(Mo)-0.2hf Eutectic Alloy

Effects of High Magnetic Field on Microstructures of MnBi Precipitated Phase in Bi-Mn Alloy Solidified from Mushy Zone

Texture Formation and Grain Boundary Characteristic of A1-4.5cu Alloys Directionally Solidified under High Magnetic Field

Characteristics of Recrystallization Texture Evolution in High Magnetic Field for Interstitial Free (IF) Steel Sheet

Investigation on Macrosegregation and Dendrite Morphology During Directional Solidification of Al-Cu Hypereutectic Alloys under A Strong Magnetic Field

Orientation control of crystal growth for TbFe1.9 alloy in a magnetic field

Microstructure Features and Carbon Partitioning in Low Temperature Bainitic Steels: the Effect of Magnetic Field

Influence of an Axial Magnetic Field on Microstructures and Alignment in Directionally Solidified Ni-based Superalloy