Abstract:Numerous molecular dynamics (MD) simulations have been performed to investigate the effect of the nanopores on the martensitic transformation (MT) of pure iron (Fe) during the heating-cooling cycle. As per the simulation results, nanopores can obviously affect the difficulty on MT during the cooling process in two ways: On the one hand, the volume ratio of nanopores to simulation box model (R p/b ) can influence the distribution configuration of stacking fault (SF) to change the type of austenite microstructure during the heating process owing to the obstruction of the nanopores on the dislocation slip. The effect of nanopores is not obvious when R p/b is less than 2.22 %. The main type of austenitic changes from defect-free/simple-SF types to the intersecting-SF type and, finally, to the dislocation-cell type with an increase in R p/b from 2.22 % to 17.9 %. The dislocations in intersecting-SF type and dislocation-cell type austenitic microstructures can provide the nucleation site of MT, thus increasing the MT temperature. On the other hand, the high surface energy of the nanopores caused by the incomplete atomic lattice can provide the necessary energy for the nucleation of martensite, which then promotes the occurrence of MT during the cooling process. When the nanopores intersect with the dislocation wall in dislocation-cell type austenitic microstructure, martensite nucleates at the nanopores surface and then grows along the dislocation wall. In the previous investigation of selective laser melting martensitic steel, the nanopore in the microstructure was generally believed harmful to the mechanical property of specimen; however, in this study, it has been observed to promote the MT during solution-quenching heat treatment, which improves the mechanical property by improving the content of martensitic phase. This provides a new perspective in determining the significance of nanopores in microstructures.

Crystallographic orientation variation of isothermal pearlite under high magnetic field

Analysis on the Crystallographic Orientation of Micro-Area under High Magnetic Field

An integrated exploration from microstructure to mechanics in austenite to pearlite transformation of high carbon steel under high magnetic fields

Effects of high magnetic field on isothermal pearlite transformation and microstructure in a hypereutectoid steel

New Microstructural Features Occurring During Transformation from Austenite to Ferrite under the Kinetic Influence of Magnetic Field in A Medium Carbon Steel

Inner connection of bainite and pearlite transformation in steels

Simulation of lamellar pearlite growth morphology with phase-field method

Cube Texture Development in Pure Ni during Annealing in a High Strength Magnetic Field

EBSD Study of the Influence of a High Magnetic Field on the Microstructure and Orientation of the Al-Si Eutectic During Directional Solidification

A new orientation relationship observed between MC and ferrite in TiMo microalloyed steel produced by ultra-fast cooling

Determination of the orientation relationship between austenite and incommensurate 7M modulated martensite in Ni–Mn–Ga alloys

The effect of nanopores on the mechanism of martensitic transformation in pure iron during the heating-cooling cycle: A molecular dynamics study

Effects of high magnetic field on austenite formation and grain size in a hypereutectoid carbon steel

Relationship between crystallographic structure of the Ti2O3/MnS complex inclusion and microstructure in the heat-affected zone (HAZ) in steel processed by oxide metallurgy route and impact toughness

Crystal orientation induced by high magnetic fields during peritectic reaction of alloys

Microstructure development in eutectic Al–Fe alloy during directional solidification under high magnetic fields at different growth velocities

Tailoring the microstructure and properties of a Cu–Co immiscible alloy by high magnetic field assisted heat treatment

Anisotropic Magnetostriction in a ⟨110⟩ Oriented Crystal Tb0.36Dy0.64(Fe0.85Co0.15)2 after Coaxial Field Annealing

-orientation growth of Tb-Dy-Fe alloys induced by high magnetic fields during directional solidification

Temperature and electric field induced phase transition in [110]C-oriented 0.63Pb(Mg1/3Nb2/3)O3–0.37PbTiO3 single crystals

Constitutional supercooling and corresponding microstructure transition triggered by high magnetic field gradient during directional solidification of Al-Fe eutectic alloy