Abstract:Directional solidification of A1-4.5Cu alloy refined by adding Al-5Ti-1B has been carried out to investigate the texture formation and grain boundary characteristic of the paramagnetic crystal under a high magnetic field. OM and EBSD were applied to analyze the microstructures solidified at different temperature gradients (G) and magnetic field intensities (B). The results show that at the temperature gradient of 27 K/cm; the orientations of fcc alpha-Al grains without magnetic field are random. However, as a high magnetic field is imposed, the easy magnetization axes < 310 > of the alpha-Al grains are aligned parallel to the direction of the magnetic field leading to < 310 > texture. Meanwhile, the ratio of coincidence site lattice (CSL) grain boundaries increases with the increment of magnetic field intensity and reaches its maximum value at 4 T, but decreases as the magnetic field enhances further. On the other hand, when the temperature gradient is elevated, columnar dendrite morphology is exhibited without magnetic field; while a 6 T high magnetic field is introduced, the columnar dendrites are broken and equiaxed grains of random orientations are obtained. The alignment behavior of the free crystals in melt could be attributed to the magnetic crystalline anisotropy of alpha-Al. Moreover, the influence of fluid flow on the texture formation and CSL grain boundary development under magnetic field is discussed. The absence of convection is benefit for grain reorientation and CSL boundary formation. The application of high static magnetic field will inhibit the macro-scale convection. However, the interaction between thermoelectric current and magnetic field will cause micro-scale fluid flow, i.e., thermoelectric magnetic convection (TEMC). The TEMC will give rise to perturbation near the solid-liquid interface leading to the appearance of freckles as well as the decreasing of the ratio of CSL boundary. Moreover, it is proposed that the formation of CSL boundary is associated with the rotation of the free grains in melt along specific crystallographic axes by magnetic torque.

Constitutional supercooling and corresponding microstructure transition triggered by high magnetic field gradient during directional solidification of Al-Fe eutectic alloy

Directional Solidification of Al-8 Wt. % Fe Alloy under High Magnetic Field Gradient

Microstructure development in eutectic Al–Fe alloy during directional solidification under high magnetic fields at different growth velocities

Magnetic Field-Dependent Microstructure Evolution of Solidified Co39.2Ni39.2Al21.6 Eutectic Medium-Entropy Alloy

Microscopic Mechanisms of Solute Migration and Redistribution at the Solid-Liquid Interface During Directional Solidification of a Cu–Ag Eutectic Alloy under High Magnetic Fields

Influence of High Magnetic Fields on Phase Transition and Solidification Microstructure in Mn-Sb Peritectic Alloy

EBSD Study of the Influence of a High Magnetic Field on the Microstructure and Orientation of the Al-Si Eutectic During Directional Solidification

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Influence of a High Magnetic Field on the Precipitation Behavior of the Primary Al3Fe Phase During the Solidification of a Hypereutectic Al-3.31 Wt% Fe Alloy

Effect of high magnetic field on solidification microstructure evolution of a Cu-Fe immiscible alloy

Liquid State Dependent Solidification of a Co-B Eutectic Alloy under a High Magnetic Field

Microstructure and Crystallization Evolution of Directionally Solidified Al–Cu–Si Alloys With the Assistance of a Static Magnetic Field

EBSD Study on the Effect of a Strong Axial Magnetic Field on the Microstructure and Crystallography of Al-Ni Alloys During Solidification

Texture Formation and Grain Boundary Characteristic of A1-4.5cu Alloys Directionally Solidified under High Magnetic Field

Microstructural Evolution and Solute Migration in the Mushy Zone of Peritectic Al-18 At. Pct Ni Alloy in High Magnetic Fields

Effect of a High Magnetic Field on the Growth of Ternary Al-Cu-Ag Alloys During Directional Solidification

Control of the Alloying Element Distribution in Al-Alloys by High Magnetic Fields

Faceted Growth Of Primary Al2cu Crystals During Directional Solidification In High Magnetic Field

Effect of Horizontal Magnetic Field on the Microstructure of Directionally Solidified Ni-Based Superalloy

Distribution of alloying elements and the corresponding structural evolution of Mn–Sb alloys in high magnetic field gradients

Directional Growth Behavior of Α(al) Dendrites During Concentration-Gradient-controlled Solidification Process in Static Magnetic Field