Abstract:Dendrite growth velocity as a function of initial bulk undercooling was systematically studied in situ using high speed thermal imaging of highly undercooled Ni90Cu10 and Ni95Cu5 single phase alloy melts. For these two non-dilute concentrated alloys, the dendrite growth velocity first increased continuously at small and mediate undercooling regimes and then discontinuously to a maximum value at the high undercooling range. A clear plateau appeared in the growth velocity-undercooling curve revealed a gradual transition from mainly solute-controlled growth to mainly thermal-controlled growth, which was very similar to the solidification characteristics of a dilute alloy. The discontinuity appeared in the growth velocity-undercooling relationship was suggested to be induced by the finite solute diffusion speed in the bulk melt ahead of the advancing solid-liquid interface. Microstructure, substructure and microtexture of the two undercooled alloys were characterized using EBSD technique, and the fundamental mechanism behind “spontaneous grain refinement” is elucidated. The microstructure evolution indicated two kinds of grain refinements: one was dendrite remelting induced grain refinement and the other was recrystallization induced grain refinement. It was found that the texture of the as-solidified microstructure was getting more and more random as the initial bulk undercooling increased, which was due to the increased stress and recrystallization in the as-solidified microstructure. New evidence of grain refinement was found in the as-solidified samples. We found that the samples undercooled beyond the critical undercooling had a grain refined microstructure and that this corresponded with a clear discontinuity in the dendrite growth velocity-undercooling curve. Microstructural data suggested that in Ni-Cu alloys grain refinement at a high undercooling was a consequence of a recrystallization process, which contrasted with conventional grain refined alloys where grain refinement appeared to be the result of remelting-induced dendritic fragmentation.

Non-axially Oriented Dendritic Microstructures and Their Mechanical Characteristics of Single-Crystal Al-4.5%Cu Alloy

Characterization of Microstructures and Growth Orientation Deviating of Al2Cu Phase Dendrite at Different Directional Solidification Rates

Microstructure Evolution of Directionally Solidified Al-Cu Alloys

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Anaxial Columnar Dendrites in Directional Solidification of an Al–15wt.% Cu Alloy

Probing the Degenerate Pattern Growth of {100}<011> Orientation in a Directionally Solidified Al-4.5 Wt% Cu Alloy

Microstructure Evolution and Orientation Analysis of Hypereutectic Al-Al2cu Alloy under Directional Solidification

Interfacial morphology evolution in directionally solidified Al-1.5%Cu alloy

Study on the Homogeneity of Tilted Dendritic Structures in Single Crystal Superalloys

Growth Stability of Twinned Dendrites in Directionally Solidified Al-4.5 Wt% Cu Alloy

Investigation on the Formation Mechanism of Irregular Dendrite During Directional Solidification of Al–Cu Alloys under a High Magnetic Field

EVALUATION OF THE UNIFORM DISTRIBUTION OF DENDRITIC MICROSTRUCTURE IN DIRECTIONALLY SOLIDIFIED SINGLE-CRYSTAL DD6 SUPERALLOY

Formation of Twinned Dendrites During Unidirectional Solidification of Al-32%Zn Alloy

Influences of Microstructure and Orientation on Fracture Toughness of Intermetallic Phase Al2Cu‐based Alloy under Directional Solidification

Two-Phase Dendrite and Bimodal Structure in an Al-Cu-Ni Alloy: Their Roles in Hardness

Effect Of Directional Solidification Rate On Microstructure And Orientation Of Hypereutectic Al-Al2cu Alloy

Three-Dimensional Dendritic Morphology and Branching Mechanism in Directionally Solidified Mg-Zn Alloy

Research of Dendrite/Cellular Interfacial Transitional Velocity in Directionally Solidified Al-4%Cu Alloy

Influence of Crystal Orientation on the Morphology of a Single Crystal Superalloy During Directional Solidification

Primary-dendrite-pattern regulation by secondary branch during the directional solidification of the single crystal superalloy

Microstructure, Mechanical and Tribological Performances of a Directionally Solidified Γ-Tial Alloy