Abstract:The microstructure evolution and thermal stability of continuous SiC fiber-reinforced Ti60 (SiCf/Ti60) composites at elevated temperatures have not been reported. The objective of this study was to conduct thermal exposure experiments of SiCf/Ti60 composites at 400 degrees C / 100 h, 600 degrees C / 100 h, and 800 degrees C / 100 h. The aim was to compare the interfacial and matrix microstructures under hot isostatic pressure (HIP) conditions and to assess their thermal stability. The results show that SiCf/Ti60 composites have excellent long-term thermal stability at 600 degrees C thermal exposure, short-term thermal stability at 800 degrees C thermal exposure and the thickness of the reaction layer (RL) increases to 1.27 mu m. From HIP to 800 degrees C thermal exposure, RL changes from finegrained TiC II discontinuous silicides II coarse-grained TiC to fine-grained TiC II near-continuous silicides II medium-grained TiC II coarse-grained TiC. Large-sized beta-Ti and S2 silicides precipitated in the matrix at 800 degrees C thermal exposure, where beta-Ti and alpha-Ti followed the Burgers orientation relationship (BOR), and the S2 exhibited a multitude of orientation relationships with both beta-Ti and alpha-Ti. Furthermore, it was demonstrated that thermal exposure resulted in a reduction in the dislocation density of the matrix. In particular, thermal exposure at 800 degrees C led to a decrease in the dislocation density of the matrix by 47 %. This observation provided a novel approach for the reduction of crystal defects in the matrix and the enhancement of the properties of SiCf/Ti composites.

Effects of Thermal Shock on the Microstructures, Mechanical and Thermophysical Properties of SiCnws-C/C Composites

Influence of Thermal Shock on the Mechanical Behavior of Si-SiC Coated Carbon/Carbon Composites

Properties evolution and damage mechanism of SiC/SiC composites after thermal shock at 1300 °C

Thermal cycling of silicon carbide whisker reinforced ZL101A composite

Cyclic thermal shock behaviors of carbon fibers reinforced SiCN ceramics with architectures

Microstructural Evolution and Phase Transformation of Cansas 3303 SiC Fibers During Thermal Shock at 1200°C

Mechanical and thermal shock properties of C f /SiBCN composite: Effect of sintering densification and fiber coating

Mechanical and Thermal Shock Properties of Cf/SiBCN Composite: Effect of Sintering Densification and Fiber Coating

Mechanical /thermal Shock Properties and Failure Mechanisms of Cf/SiBCN Composites Effect of Sintering Densification and Fiber Coating

Cyclic thermal shock behaviors of carbon fibers reinforced SiCN ceramics with bio-inspired Bouligand-like architectures

Thermal Fatigue Behavior of C/C Composites Modified by SiC–MoSi2–CrSi2 Coating

Thermal Shock and Residual Strength Testing of SiC/SiC Composite Braided Tubes

Effect of the Incorporation of SiC Nanowire with Double Protective Layers on SiC Coating for C/C Composites

Finite Element Simulation of Stress Distribution and Development of C-F/Sic Ceramic-Matrix Composite Coated with Single Layer Sic Coating During Thermal Shock

Oxidation resistance behavior of SiC nanowires/Si layer on the C/SiC composites

Influence of SiC Nanowires on the Properties of SiC Coating for C/C Composites Between Room Temperature and 1500°C

High-temperature Microstructure Evolution and Thermal Stability of SiCf/Ti60 Composites

Effect of SiC Nanowires on the Thermal Shock Resistance of Joint Between Carbon/carbon Composites and Li2O–Al2O3–SiO2 Glass Ceramics

Effect of SiC Content on Mechanical Properties and Thermal Shock Resistance of BN–ZrO2–SiC Composites

Thermal shock behavior of co-continuous TiCx-Cu cermets in air and anaerobic environment

Influence of High-Temperature Oxidation and Test Conditions on the Dynamic Mechanical Properties of 2.5D SiCf/SiCm Composites