Abstract:Understanding the thermal stability of ceramic matrix composites is one of the necessary prerequisites for their engineering application. This study aimed to investigate the stress response and failure mechanism of SiC-coated Cf composite during thermal shock in an O2 free environment, at temperature between 500 and 1800 degrees C. Composites with a single layer of SiC coating, and a reinforcing phase are carbon fiber yarns with a threedimensional four-step braided structure. A meso-scale finite element model considering the orientation of fiber yarns was established to analyze thermal residual stress (TRS) and thermal shock stress (TSS) by transient analysis. Results indicated that the most dangerous position generated by the TRS was in the matrix close to the fiber yarn/matrix interface. Initial cracks first nucleated in the matrix, because the matrix was subjected to large residual compressive stress along the braiding direction, which is related to the distribution characteristics of the fiber yarns (braiding method). Fiber yarns with different orientation exhibited almost the same stress state, and interaction between fiber yarns resulted in a similar "twisted" state. For single fiber yarns, the principal axis and fiber yarn/fiber yarn interface were prone to failure. TSS in the composites rapidly increased during the initial cooling stage. A sudden change in temperature and stress gradient led to cracking and peeling at the composites/ coating interface. Possible failure modes and mechanisms of the composites with and without the SiC coating are discussed.

Influence of Thermal Shock on the Mechanical Behavior of Si-SiC Coated Carbon/Carbon Composites

Influence of High Temperature Cyclic Thermal Shock on Compression Properties of C/C Composites with SiC Coating

Influence of SiC Coating Thickness on Mechanical Properties of SiCf/SiC Composite

FEM Analysis of the Stress Response and Failure Mechanism of SiC-coated Cf/ SiC Composites During Thermal Shock

Effect of Thermal Shock and Oxidation on Mechanical Property of Carbon/Carbon Composites with A Silicide Coating

Effects of Thermal Shock on the Microstructures, Mechanical and Thermophysical Properties of SiCnws-C/C Composites

Microstructure and Thermal Shock Resistance of SiC/CNT–SiC Double-Layer Coating for Carbon/carbon Composites

Mechanical and thermal shock properties of C f /SiBCN composite: Effect of sintering densification and fiber coating

An Investigation of Dynamic Failure Progress and Properties of 2D C/SiC Composite from 173 K to 1273 K by SHTB

Thermal shock behavior of a three-dimensional SiC/SiC composite

Study on the Thermal Fatigue Behavior of SiC Coated Carbon/carbon Composites

Mechanical and Thermal Shock Properties of Cf/SiBCN Composite: Effect of Sintering Densification and Fiber Coating

Thermal Shock Behavior of 3-Dimensional C/SiC Composite

The Behavior of Coatings and SiCf/SiC Composites under Thermal Shock

Mechanical /thermal Shock Properties and Failure Mechanisms of Cf/SiBCN Composites Effect of Sintering Densification and Fiber Coating

Thermal Shock Resistance of A 2D-C/sic Composite and Its Damage Mechanisms

Thermal Shock Resistance of SiC/Si-Mo Multilayer Oxidation Protective Coating for Carbon/Carbon Silicon Carbide Composites

Microstructure and Resistance to Thermal Shock of SiC Coatings That Are Prepared on C/C-composite Pyrocarbon Matrices of Various Textures

Thermal Shock Properties of a 2D-C/sic Composite Prepared by Chemical Vapor Infiltration

An Inlaid Interface of Carbon/carbon Composites to Enhance the Thermal Shock Resistance of SiC Coating in Combustion Environment

Damaging Mechanism of 3D C/SiC Composite with Thin Interlayer During Thermal Shock Process