Abstract:A non-contact testing and characterization method based on air-coupled acoustic excitation and interferometric displacement measurements of micro-scale MEMS structures at room conditions is introduced. In demonstrating its potential uses in testing and characterization, the present non-contact approach is applied to (i) micro-cantilever beams and (ii) rotational disk oscillators. Air-coupled multi-mode excitation of micromechanical cantilever-type oscillators under a pulsed acoustic field generated by an air-coupled transducer is demonstrated and reported. Also, the testing and characterization of a micro-scale rotational disk oscillator developed for a new class of sensor platform is demonstrated. The main design objective of the rotational disk oscillator class is to overcome the out-of-plane motion related sensitivity limitations of the cantilever-based sensors at high frequency operations. The dynamics of the rotational disk oscillators is more complex than micro-cantilever beams due to its in-plane motion in addition to its various out-of-plane modes of vibration. The fabrication of a rotational disk oscillator requires a suspended disk whose underside is visibly inaccessible due to a narrow micro-gap. In addition to the dynamic characterization of the cantilever beams and rotational disk oscillators, the current investigation demonstrates that the presented approach can address unique structural concerns such as the verification of a gap separation of the rotational oscillator from the underlying silicon substrate. Utilizing the proposed technique, the resonant frequencies of the oscillator structures are obtained and its potential uses in the testing and characterization of micro-scale structures are discussed. The major specific advantages of the introduced approach include that (i) its noncontact nature can eliminate testing problems associated with stiction and adhesion, and (ii) it allows direct mechanical characterization and testing of components and sub-components of a micro-scale devices.

Measuring the Orientation of the Flexural Vibrations of a Cantilevered Microwire with a Micro-Lens Fiber-Optic Interferometer

General Existence of Flexural Mode Doublets in Nanowires Targeting Vectorial Sensing Applications

Determining the direction of a nanowire's flexural vibrations by micro-lens optical fiber interferometer

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

High-Sensitivity Microfiber Strain and Force Sensors

Static Nano-Control Of Cantilever Beams Using The Inverse Flexoelectric Effect

Measurement of Nanofiber Mechanical Flexural Modes Based on Near-Field Scattering

Miniature on-fiber extrinsic Fabry-Perot interferometric vibration sensors based on micro-cantilever beam

Optical diffraction for measurements of nano-mechanical bending

Nanometer-Scale Vibration Measurement Using an Optical Quadrature Interferometer Based on 3 × 3 Fiber-Optic Coupler

Applications of Laser Vibrometer in Vibration Measurement of Microstructures

Non-Contact Mechanical Testing and Characterization of Micro-Scale Structures

Dynamic Characterization of Small Fibers Based on the Flexural Vibrations of A Piezoelectric Cantilever Probe

Microstructured Cantilever Probe on Optical Fiber Tip for Microforce Sensor

Three-dimensional printed microcantilever with mechanical metamaterial for fiber-optic microforce sensing

Optical Fiber Bending Sensor Based on Michelson Interferometer

Optical Fourier Transform Based In-Plane Vibration Characterization for MEMS Comb Structure

Acoustic-Excitation Optical Coherence Vibrometer for Real-Time Microstructure Vibration Measurement and Modal Analysis

Method for measuring micro-cantilever force constant

Theoretical analysis and experimental study on the vibration of cantlilever

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure