Abstract:In this paper, we present a broadband out-of-phase power divider with high power-handling capability. The proposed device consists of several sections of double-sided parallel-strip lines (DSPSLs), a mid-inserted conductor plane, and two external isolation resistors, which are directly grounded for heat sinking. A through ground via (TGV), connecting the top and bottom sides of DSPSLs, is employed. The special metal via is realized to short the isolation resistors at full-frequency band when the odd-mode is excited. Meanwhile, it can be ignored as the excitation is even-mode. This property is efficiently utilized to improve the bandwidth. To examine the proposed power divider in detail, a set of closed-form equations are derived. Meanwhile, the power operation analysis illustrates that the proposed power divider is a good candidate for high power applications. The design charts show that the proposed device can support a wide frequency ratio range (1-1.7). Furthermore, broadband responses can be obtained when proper frequency ratios are adopted. For verification, an experimental power divider operating at 1.25/1.75 GHz is implemented. The measured results exhibit a bandwidth of 44.3% with better than 15 dB return loss and 18 dB port isolation is achieved.

Multilayer Balanced-to-Unbalanced Power Divider with Wideband Transmission Characteristic and Common-Mode Suppression

Wideband Single-Ended-to-Balanced Power Divider with Intrinsic Common-Mode Suppression

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Balanced-to-unbalanced Filtering Power Divider with Compact Size and High Common-Mode Suppression

Broadband Multilayer In-Phase Power Divider

A Wideband Balanced-to-Unbalanced Out-of-Phase Power Divider Based on Hybrid Microstrip/Slotline Structure

A new balanced-to-single-ended (BTSE) power divider

Novel Ultra-Wideband (UWB) Multilayer Slotline Power Divider With Bandpass Response

Design of an Ultra-Wideband Power Divider with Good In-Band Performance and Sharp Roll-Off Skirt

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Wideband Out-Of-Phase Power Dividers With Improved Isolation Performance

A compact ultra-wideband power divider with high isolation

A New Balanced-to-Balanced Power Divider/Combiner

X-Band Power Divider Design and Its Network for Active Electronically Scanned Array Vertical Integration

A Broadband Power Divider Based on Vertically Installed Planar Circuit Structure

A Novel Wideband Filtering Power Divider With Embedding Three-Line Coupled Structures.

Broadband Balanced-to-Balanced Filtering Power Divider Using HMSIW-SSPP Transmission Line

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

A Balanced-to-Balanced Power Divider with Arbitrary Power Division

A Design of Wide-Band and High-Isolation Power Divider