Abstract:In this paper, we present a broadband out-of-phase power divider with high power-handling capability. The proposed device consists of several sections of double-sided parallel-strip lines (DSPSLs), a mid-inserted conductor plane, and two external isolation resistors, which are directly grounded for heat sinking. A through ground via (TGV), connecting the top and bottom sides of DSPSLs, is employed. The special metal via is realized to short the isolation resistors at full-frequency band when the odd-mode is excited. Meanwhile, it can be ignored as the excitation is even-mode. This property is efficiently utilized to improve the bandwidth. To examine the proposed power divider in detail, a set of closed-form equations are derived. Meanwhile, the power operation analysis illustrates that the proposed power divider is a good candidate for high power applications. The design charts show that the proposed device can support a wide frequency ratio range (1-1.7). Furthermore, broadband responses can be obtained when proper frequency ratios are adopted. For verification, an experimental power divider operating at 1.25/1.75 GHz is implemented. The measured results exhibit a bandwidth of 44.3% with better than 15 dB return loss and 18 dB port isolation is achieved.

A new balanced-to-single-ended (BTSE) power divider

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

A Balanced-to-Balanced Power Divider with Arbitrary Power Division

A New Balanced-to-Balanced Power Divider/Combiner

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

Multilayer Balanced-to-Unbalanced Power Divider with Wideband Transmission Characteristic and Common-Mode Suppression

An Absorptive Balanced-to-Balanced Power Divider

Balanced-to-unbalanced Filtering Power Divider with Compact Size and High Common-Mode Suppression

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

A Balanced-To-Balanced Filtering Gysel Power Divider with Unequal Power Division

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

W-band Power Divider Based on H-plane Slot Waveguide Bridge

A Balanced-to-Unbalanced Hybrid Ring with Arbitrary Power Division Ratio

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

A design of single‐ended to differential‐ended power divider for X band application

A General Method for Balanced-to-Unbalanced Filtering Out-of-Phase Power Divider Design

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

Ultra‐wideband Power Divider Employing Coupled Line and Short‐ended Stub

A Broadband Waveguide-Based Power Divider in W-band

A Design Approach for Dual-Band Wilkinson Power Divider with Two Pairs of Coupled-Line Sections